Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

err054 2

Status
Not open for further replies.

jackthe

Technical User
Nov 1, 2007
14
AU
last night i installed the dst patch onto a option 11c. Since then err054 keeps on reappearing. Anyone have any idea what this error is?
thanks
 
ERR0054
NAS not configured for PECL. Enable NAS in LD 17.

Severity: Info
 
What does the PECL stand for

thanks
 
Periodic Clearing Signal for Trunk Routes - LD 16

Mato' Was'aka
 
Feature interactions
Called Party Disconnect Control
Toll Operator Break-in
The Called Party Disconnect Control and Toll Operator Break-in can exist on
the same system and function on the same routes, but are not to be used in
conjunction with Periodic Clearing.
Feature packaging
This feature is packaged under International Supplementary Features
(SUPP), package 131.
Feature implementation
LD 16 – Create or modify the length of ringing time allowed for trunk routes.
Feature operation
No specific operating procedures are required to use this feature.
Prompt Response Description
...
PECL (NO) YES (Do not send) send Periodic Clearing signal.
DCTI (0)-511 The time (in seconds) an extension is allowed to ring or be
on hold before the trunk is disconnected.
0 specifies disconnection will not occur.


Mato' Was'aka
 
The full error message is Err054 43 0 13, does this mean something else
thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top