Ericsson MD110 No Login prompt

[d101]

Hi,

I had a problem in login into the Telesystem - Model Ericsson MD110. It didn't prompt me any login screen at all. What I should do?
Pls help.. As I need to modify the user access.

Regards

Patrick Kuah
FOODBEX GLOBAL PTE LTD

 

[SYAR2003]

Well to getting an MD teknician to your site comes to my mind.
There could be several resons really.
Cabling , tcp/ip , configuration , blocked MML port in MD , etc

(blocked mml port in md usually gets fixed by restarting unit twp2&twp3 in the lim)

syar

 

[d101]

Hi Syar,

This problem only occur after i have reset the PLU5 cards.
What i need to do after the resetting the cards?? Do you think this is the major cause. And how to solve it ??

 

[SYAR2003]

Sorry i'm not familiar with that setup .
Maybe some other have som inputs ....
Whats PLU5 cards ?

 

[m110d]

I really think you need somebody who knows about MD110 to have a look at your system. I take it that you have reset the LPU5 card, this is the processor card. How did you reset it, did you push the button or remove and replace the card? do you have a LPU display attached to the LPU5?....m110d

 

[d101]

Hi

Maybe I phase it this in this way. The power and the battery went down. And the login screen is deactived. How to reset it?

 

[SYAR2003]

If lim1 is up and running the display card on LPU5 should show 101 or 104 .

If the i/o type card is NIU and your management system (dna ?) can't connect there might be a tcp/ip issue.
The NIU doesn't have to use AAU to use ethernet telnet
as it has a eth port on it.

If the i/o is IPU it can be connected to management system
in two different ways (same for NIU)
Either directly via v.24 port to server or from v.24 to a AAU card witch is connected to ethernet.

So only way to do some fault locating is to connect a pc directly to IPU/NIU at the 1'st v.24 port , log into the system and analyze alarms and fault signals.

syar

To do a reset of lim 1 and all it's programs and cards push
the button on LPU5 one time ( in and out again ) .