Ericsson DBC 4422 02 SIP Phone

[Claudioo]

Hello.

I tried to connect an Ericsson IP Phone (DBC 4422) with Asterisk (Trixbox) over SIP protocol.
I connected it succesfuly but when I try to do a call, press numbers, line opens and nothing more till system cancel "connection" when no digits are pressed.
Incoming calls are OK.

Please can you help me with configurations on Asterisk and SIP config file of Ericsson Phone.

Thank you in advance for your help!

 

[Claudioo]

In this site of Digium

http://kb.digium.com/entry/35/27/

explains DTMF modes for resolving this problem.

Please, how can I do that configuration on DBC4422 config file?

Thnx.

 

[TeleLion]

Ca you post the config file your using right now

TELEC3

 

[Claudioo]

Hello.

Config file that I am using now is:


[System]
;--------------------------
; File: d42x02-config.txt
; Product id and version: CAA 158 0042 R6A
; Release date: 2007-12-06
;-------------------------
; The system parameter may have the values MD110, WEBSWITCH3, MX-ONE, MD-E or BP
;System=WEBSWITCH3
;System=BP
;System=BP-R15
;System=MD110
;System=MD-E
System=MX-ONE
;System=IMT
OverLap=YES
RRQTtl=600
GatekeeperID=LIM*
;Domain=ebc.ericsson.se
PrimaryGKAddress=192.168.12.61
;SecondaryGKAddress=192.168.0.1
GatekeeperDiscovery=NO
;AdminPasswd=RbdbSdc9c
;LogOffRestriction=LogOffAllowed
;LogOffRestriction=DefaultNumberUsed
;LogOffRestriction=PermitIndividualLogOn

[Software]
;-----------------------------------------------
; The following files are mandatory:
; Bootrom d42x02-boot_Rev.dat (CAA158 0044)
; Application d42x02_Applic_Rev.dat (CAA158 0043)
; Configuration File d42x02-config.txt (CAA158 0042)
; The following files are optional:
; Language File d42x02-Lang_Rev.txt (CAA158 0045)
;-----------------------------------------------

;All DBC42x02 (x=0,2 or 5) shall use same boot ,
;application and language file. It shall be stored
;in the dbc42x02 directory.
BootFile=/dbc42x02/d42x02-boot_R3G.dat
BootVersion=R3G

ApplicationFile=/dbc42x02/d42x02-applic_R6A.dat
ApplicationVersion=R6A

;[802.1x]
;LANAccessControl=AUTO
;StoreUserIdPassword=YES
;UserType=PHONE ;PHONE or USER
;UserIdentity=
;UserPassword=

[Absence]
Profile=*10*profileNo#,#10#
FollowMe=*21*extensionNo#,#21#
ExtFollowMe=*22#extensionNo#,#22#
AbsenceReason=*23*reasonCode#,#23#
Lunch=0*hhmm
GoneHome=1
OfficialMatter=2*hhmm
Meeting=3*hhmm
Trip=4*mmdd
Illness=5*mmdd
FreeTime=6*mmdd
Course=7*mmdd
Busy=8*hhmm
Absent=9*hhmm
;Special=9*mmdd
;ParentalLeave=
;DayOff=7*mmdd
;Vacation=6*mmdd

[Authorization] ;replaces fthe following code with "-"
Code=*61* ;Account code for Standard Appl. System
Code=*72* ;Auth. code for Standard Appl. System
Code=*73* ;Lock Central auth. code
Code=#73* ;Unlock cent. auth. code
Code=*74* ;Change individ. ath. code
Code=*75*-*n# ;Dial with indiv. auth. code. n means that the nr will be visible
Code=*76* ;Lock individ. auth. code
Code=#76* ;Unlock individ. auth. code

[AutoNeg]
AutoNegLANPort=YES ;When AutoNeg is set to YES, Speed and Duplex will not
;DuplexLANPort=HALF ;be read. The resulting speed and duplex will be the
;SpeedLANPort=10 ;result of the negotiation between the phone and the
AutoNegPCPort=YES ;network device it is connected to(switch/hub/PC).
;DuplexPCPort=FULL
;SpeedPCPort=100
;network device it is connected to(switch/hub).
;[BackupGK]
;System=WEBSWITCH3 ;System=MD110 not allowed
;IPAddress=192.168.0.1

[Codecs]
; G.711 is mandatory but the priority order is optional
G.711A
G.711U
G.729A
G.729AB
G.723

[DefaultPacketSize]
DefaultMsPerPacket711=30 ;10,20 or 30ms. If not 30, then may not be possible to call DBC42x01 & DBC413 phones(that don't support framesize negotiation).
DefaultMsPerPacket729=30 ;10,20,30,40,50 or 60ms. If not 30, then may not be possible to call DBC42x01 & DBC413 phones(that don't support framesize negotiation).

[DIFFSERVTCP]
TrafficClass=2 ;Class B
DropPrecedence=2 ;Medium drop percentage

[DIFFSERVUDP]
TrafficClass=5 ;Expedited Forwarding
DropPrecedence=3 ;High drop percentage, recomended for EF

[Display]
ShowDTMFDigits=YES

;[Emergency]
;System1=MD110
;Address1=192.168.0.1
;Port1=1720
;System2=BP-R15
;Address2=192.168.0.1
;Port2=1720
;EmergencyNr=112
;A-Number=077601
;RouteId=PASSW

;[FunctionKeysDBC425]
;CallBack=1
;FollowMe=2
;FreeOnSecond=3
;MessageWaiting=5
;Transfer=6
;Menu=
;Conference=
;CallPickUp=
;CallWaiting=
;Intrusion=
;HomeURL=10
;DirectoryURL=11
;EnablePBXStoring=NO

;[FunctionKeysDBC422]
;Conference=0
;Transfer=1
;Settings=5
;FollowMe=6
;MessageWaiting=7
;FreeOnSecond=8
;CallList=9
;CallPickUp=
;CallWaiting=
;Intrusion=
;EnablePBXStoring=NO

;[FunctionKeysDBC420]
;Conference=0
;Transfer=1
;FollowMe=6
;MessageWaiting=7
;FreeOnSecond=8
;CallPickUp=
;CallWaiting=
;Intrusion=
;EnablePBXStoring=NO

;[Handsfree]

[IPPhoneAdministrator]
IPPhoneAdministrator=YES ;Default = YES
;ServerAddress=192.168.0.1 ;Optional
;ServerPort=8080 ;Optional

[Language]
;Default language is English. Optional languages can be selected
LanguageFile=/dbc42x02/d42x02-lang_R6A.txt
LanguageVersion=R6A
OptionalLanguage=EN,*08*0#
;OptionalLanguage=FR,*08*1#
;OptionalLanguage=DE,*08*2#
;OptionalLanguage=ES,*08*3#
;OptionalLanguage=IT,*08*4#
;OptionalLanguage=SV,*08*5#
;OptionalLanguage=FI,*08*6#
;OptionalLanguage=DA,*08*7#
;OptionalLanguage=NO,*08*8#
;OptionalLanguage=NL,*08*9#
;OptionalLanguage=PB,*08*9#
;OptionalLanguage=PL,*08*9#
;OptionalLanguage=PT,*08*9#
;OptionalLanguage=XL,*08*9#
;OptionalLanguage=SK,*08*9#
;OptionalLanguage=CS,*08*9#
;OptionalLanguage=ET,*08*9#
;OptionalLanguage=HU,*08*9#
;OptionalLanguage=LT,*08*9#
;OptionalLanguage=SL,*08*9#
;StartupLanguage=EN

[LEDs]
Cad0=185,5,5,5 ; LED flash 0 cadence, first on,first off,second on,second off: in a call
Cad1=50,50,0,0 ; LED flash 1 cadence: call parked
Cad2=30,30,0,0 ; LED flash 2 cadence: incoming call

[L2QOS]
PhonePort=6,1 ;prio (0-7) ,VID(1-4095)
PCPort=0,2 ;prio (0-7) ,VID(1-4095)
LANPort=0,0 ;MAC based VLAN/802.1Q based VLAN , untagged/tagged PC originating traffic

;[NewCallClearing] ;When system=MX-ONE and in H.323 mode
;newCallClearing=NO ;YES: MX-ONE3.0 SP4 or MX-ONE3.1 SP1 or later is used

;[OMD]
;SNAddress=192.168.0.1
;SNPort=1700

[RingCads]
Internal=20,100,0,1,0,0 ;Internal ring cadence
External=7,6,7,100,0,0 ;External ring cadence
Callback=6,8,6,8,0,0 ;Callback ring cadence
Extra=6,8,6,8,6,8 ;Extra ring cadence
Delay=7 ;Delay for MNS keys in second

[Security]
Security=DISABLED ;ENABLED or DISABLED States if SRTP & TLS shall be used
CertificateValidate=NO ;States if the phone shall validate the server certificate. If YES, required that NTP-server parameter is configured.
SecurityFallback=YES ;states if it shall be allowed to continue the registration in a not secure way, if the TLS negotiation fails.
SaveUserPassword=YES
SignallingEncrypted=YES ;YES:the signalling is encrypted; This is the default value. NO:NULL cipher which means that no encryption of the signalling is done but
;the signalling sequence is the same as when the signalling is encrypted. This option can be used at fault locating.

[SIP] ;If the telephone is using auto detection of protocol, this header is used to select if H.323 or SIP shall be used.
SIPDomain=192.168.12.1
;Five parameter sets with SIPProxyAddress, SIPProxyPort and SecureSIPProxyPort are possible to define.
;Disable all three parameters in a set, not a single one. Do not change the order of the parameters.
SIPProxyAddress=192.168.12.61
SIPProxyPort=5060
SecureSIPProxyPort=5061

;SIPProxyAddress=192.168.0.1 ;The next parameter set SIPProxyAddress, SIPProxyPort and SecureSIPProxyPort has the second priority etc.
;SIPProxyPort=5060
;SecureSIPProxyPort=5061

;SIPUseTelURI=NO
SIPHookFlash=DTMF_RFC2833_*
SIP_DTMF=RFC2833 ;RFC2833 or INFO

[STOREPHONEBOOKS]
EnableStoring=NO

[SuffixServices]
Intrusion=8
CallWaiting=4
CallBack=5
CallPickUp=6
Conference=3

[Time]
TIMEZONE=CET:60:0:032502:102802
NTP-server=192.168.12.1

[Tones]
Dial tone=
0,0, ; One cadence, One frequency
500,0,0,0,0,0, ; 500ms on, 0ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0,
0,0 ; Tone in Voice is off, sine wave

Special dial tone=
1,0, ; One cadence, One frequency
500,50,0,0,0,0, ; 500ms on, 50ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Busy tone=
1,0, ; One cadence, One frequency
500,500,0,0,0,0, ; 500ms on, 500ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Alerting tone=
1,0, ; One cadence, One frequency
1000,4000,0,0,0,0, ; 1000ms on, 4000ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Congestion tone=
1,0, ; One cadence, One frequency
200,200,0,0,0,0, ; 200ms on, 200ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Special information tone=
3,4, ; Three cadences, Three frequencies
333,1,333,1,333,1000, ; 333ms on, 0ms off, 333ms on, 0ms off, 333ms on, 1000ms off
950,-10,1400,-10,1800,-10, ; 950Hz, -10dbm0, 1400Hz, -10dBm0, 1800Hz, -10dBm0
0,0 ; Tone in Voice is off, sine wave

Call waiting tone=
2,0, ; Two cadences, One frequency
200,600,200,3000,0,0, ; 200ms on, 600ms off, 200ms on, 3000ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

Offhook queuing tone= ;also used as verification tone for BP-R15
1,0, ; One cadence, One frequency
2000,990,0,0,0,0, ; 2000ms on, 990ms off, 0ms on, 0ms off, 0ms on, 0ms off
1400,-10,0,0,0,0, ; 1400Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off, sine wave

On hold tone= ; On hold tone
2 ,1, ; Two cadences, Two frequencies
10,150,10,5000,0,0, ; 10ms on, 150ms off, 10ms on, 5000ms off, 0ms on, 0ms off
400,-10,300,-10,0,0, ; 400Hz, -10dbm0, 300Hz, -10dBm0, 0Hz, 0dBm0
0,0 ; Tone in Voice is off , sine wave

External dial tone=
0,0, ; One cadence, One frequency
500,0,0,0,0,0, ; 500ms on, 0ms off, 0ms on, 0ms off, 0ms on, 0ms off
425,-10,0,0,0,0, ; 425Hz, -10dbm0, 0Hz, 0dBm0, 0Hz, 0dBm0,
0,0 ; Tone in Voice is off , sine wave

Waiting voice tone=
1,0, ; One cadence, One frequency
30,330,0,0,0,0, ; 30ms on, 330ms off,
425,-10,0,0,0,0, ; 425Hz, -10dbm0,
0,0 ; Tone in Voice is off , sine wave

[WAP]
WapProxyIP=192.168.0.1 ; WAP gateway
;WapProxyIP=192.168.0.1 ; Proxy
;WapProxyIP=192.168.0.1 ; WAP gateway
WapProxyPort=9200
;WapProxyPort=8080
AddressWithoutProxy=192.168.0.1 ;IP address to the corporate directory server, if no proxy shall be used
;AddressWithoutProxy=192.168.0.1 ;IP address to the corporate directory server, if no proxy shall be used
DirectoryAddress=192.168.0.1/mobileexec
;DirectoryAddress=192.168.0.1/mobileexec
;DirectoryAddress=192.168.0.1/cgi-bin/home.cgi?num=%NUM%&ip=%IP%
DirectoryServer=DME ;If the corporate directory is Ericsson DNA Mobile Executive, set to DME, otherwise Generic
HomeAddress=wap.ericsson.com ; wapportal
MaxAttempts=3 ;2-8
RetransPeriod=2000 ;2000-7000
CountryCode=46 ;The code of the country where the PBX is located
RouteAccessNumber=00 ;The route access number
CountryCodePrefix=00 ;The prefix of the code of the country where the PBX is located
AreaCodePrefix=0 ;The prefix of the area code in the country where the PBX is located
AreaCode=8 ;The area code in the country where the PBX is located




Thank you in advance!

 

[Claudioo]

Hello.

May anyof you help for:
a) turn off In Band DTMF mode
b) turn on Out Of Band DTMF mode

on Ericsson DBC 4422 IP Phone?

BR

 

[TeleLion]

Never tried this before but try setting:

SIP_DTMF=INFO ;RFC2833 or INFO

you can give it a try

TELEC3

 

[Claudioo]

I tested but nothing.

I know that some members (LeeMainson) here in this forum are using Ericsson dbc ip phones on trixbox but I don't know how to contact them.

Hope someone help me with configs

 

[Claudioo]

Hello!

May someone help me resolving this issue?

Thank you in advance.