Equal SLIPD on 7 circuits last night? 1

[Deweyhumbolt]

Option 81C 4.5, came in this morning to my print out of midnights. 7 out of 10 circuits showed SLIPD 124. What is this an indication of? 1 PRI was down, brought it back up with disabling DCH and reenabling loop.

Thanks, ready for questions.

Adversity is Opportunity

 

[bigindian65]

coulda just been a bounce/attenuation on the cloud side.

Mato' Was'aka

 

[Deweyhumbolt]

I shouldn't need to worry about any Internal Clocking issues?

Adversity is Opportunity

 

[phonz1]

Nope, like bigindian said, the issue was on the telco end. Not internal to you

 

[curtismo]

Sounds like the telco facilities that all seven of your T-1s goes through had an issue.

Just be lucky that they are up now...

 

[GHTROUT]

If the DCH serves 7 loops, and the DCH was sent spurious messages, then I believe you'll see the LCNT/errors on all 7 loops.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[Deweyhumbolt]

DCH 2 is only for loop 28, one of 2 loops for the DIDs. 5 of the effected circuits were not PRIs, so no DCH.

Thanks.

Adversity is Opportunity

 

[phonz1]

It doesn't matter about the d channels, it's the circuit that is at play here, if all of the circuits with hits are off of the same CO, they had a burp and that is why all of those counters incremented

 

[Deweyhumbolt]

Thank you, that is reassuring.

Adversity is Opportunity