stratman90
IS-IT--Management
We have a STK L-700 and are trying to get some new LTO-2 drives to work. The library has WWN disabeled. It will not give us the option tio change this through the main panel. DO we need to console in to set this option?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Enable WWN on STK L-700
- Thread starter stratman90
- Start date
- Status
Hi..
If only want to attach new tape drives with an FC interface into the library, the library can have an SCSI interface and works fine. You only have to review teh firmware version of your library that eneable the support for the newest tape drivers.
If you want that the library have a FC interface you have ti buy it the card with STK, and the system show the new wwn.
The dWWN (dynamic World Wide Name) its a new development of STK and by default its disabled. But its another thing.You can work with this feature dWWN disabled.
If only want to attach new tape drives with an FC interface into the library, the library can have an SCSI interface and works fine. You only have to review teh firmware version of your library that eneable the support for the newest tape drivers.
If you want that the library have a FC interface you have ti buy it the card with STK, and the system show the new wwn.
The dWWN (dynamic World Wide Name) its a new development of STK and by default its disabled. But its another thing.You can work with this feature dWWN disabled.
- Status