Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Enable speaker phone cls option? 3

Status
Not open for further replies.

NonaSuomy

Technical User
Sep 20, 2010
23
CA
Reading
I have 2008 & 2616 phones when plugged in on a certain persons line I can hear from the speakerphone the person talking but they can't hear me talking back is there a cls to enable the mic on a persons tn?

Tried both phones on my line and the speaker/mic both work just not on the users line.

CLS CTD FBD WTA LPR MTD FNA HTA ADD HFD
MWA LMPN RMMD SMWD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LND CNDA
CFTD SFD DDV CNID CDCA MSID DAPA BFED RCBD
MCTD AUTU
GPUD DPUD DNDA CFXD ARHD CLTD ASCD
ABDD CFHD FICD NAID BUZZ AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND FLXD FTTU MCBN
 
HFD - change to HFA Hands free allowed

2616 uses key 15 - must not be programmed
2008 uses key 6 - must not be programmed

Not all 2008s are handsfree capable - check sticker on bottom should say h/f
 
The M2008 don't have the M/F on the sticker so guess they are speaker only Seems kinda silly to have a speaker on a phone but no mic to talk back into :S

What is the purpose of a speaker and no mic?

His line is set to a 2008 model and is the phone on his desk, yet strangely says its setting it for a 2x16 set.

SCH3683
For 2X16 set, handsfree Class of Service is defined. Cannot assign key
15 as it is now a handsfree key.

is this a default msg, would it say the same if you had a M2008H/F model plugged into the line as well or you have to specify that the line has a 2008MF not just a 2008 on it?

Guess I will have to find him a 2616 model.
 
The speaker and no mic is commonly called "On hook dialing". You press the line, dial the number, wait for answer, then lift handset to speak. It is all meant to increase revenue by selling a second phone 'with' speaker.

The real idea of no mic was:

1) Quote a system low with mic-less phones, giving users half a feature. Then up-sell new speakerphone equipped sets, creating a continuous revenue stream.
2) See #1

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
 
Thanks gents, all always helpful!

Is there a cls option to make a button on the phone show CallerID on all DN's or to make all DN's on the phone show CID?
 
Change the COS from ADD to TDD and you will be able to see who is calling when you are on a line.
 
Thank you leatherneckdiver that worked magnificently.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top