I have had CLI set up and restrictions lifted by BT, I need to program each DDI to present itself when making outgoing calls. Mitel 3300. Please help..
I have added DID Range : 100-150, CPN Subsituation : 4488xxx, the DDI range being 0207 4488 plus 4 digit's that match the extension. I have added this to the DID Ranges for CPN Subsituation tables under outgoing call characteristics. Should this now work? Does it need a reboot of the switch?
This now works, if the default Voice CPN is filled in at the top side of the screen (Page CPN substitution)
Furthermore the index number of the DDI range that you have used must be set against this link at the bottom.
To confirm that it works set the following trace:
EDT TR TSP L2L3 X X X X ( X X X X) PLID number
Make a call and you will be able to see the calling party number. Use the same command to stop the trace.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.