EMV and SNMP Agent 1

[spacer73]

Hi, All!

I have problem with %subj%!

SysInfo: 1 GS, 5 LIMs, NIU and AAU2 in I/O LIM
VERSION: CXP1010039/4/BC11SP10/R2A
Access Agent: LZY 203 5070 R3A
SNMP Agent: LZY 203 5250 R3A

EVM only display Agent and GS, but not display LIMs.
In NODE Alarms I see:

EVM interface nodename:GS up
EVM interface nodename:LIM-1: ... up
...
EVM interface nodename:LIM-5: ... up

SMNP MIB browser say in md100/md110R1/mdNodeTopology/limTable:
No value(s)returned from query

In AAU2 /cnf/mdconfig.cnf:

...
RELEASE Ericsson MD110 BCx
LIM-1 LIM-1
...

If insert lines with LIM-2 LIM-2, LIM-3 LIM-3, ext. EVM not see even GS... Please help me!

/Andy/

P.S. In remote system with 1 LIM always work fine.

 

[ricardosilvasantos]

Hello.
Excuse for my English, because it is not very good.
I think his problem is the same as mine. When AAU will rescue the information of MD110 she is not waiting for the necessary time for the return of the command of MD110 and it sends another command soon afterwards, that can be seen connecting a PC in the door 4 of AAU. To solve that problem it is necessary to alter the time of command wait in the file mdconfig.cnf in the directory cnf.
I wait to have helped.
Ricardo.

 

[spacer73]

Hi, ricardosilvasantos!

Excuse me for my English too. ;-)

If you say about *-SHORT[LONG]-POLL [time] in mdconfig.cnf, then I have next variables:

LIM-SHORT-POLL 1000
LIM-LONG-POLL 3600
GS-SHORT-POLL 500
GS-LONG-POLL 1000
GSLINK-SHORT-POLL 500
GSLINK-LONG-POLL 1000

but it not working! EVM not found any LIMs in station.

Error log file /log/md110.log is empty.

/Andy/

 

[ricardosilvasantos]

Hello, spacer73.
As always, I will excuse myself for my terrible English, because I speak Portuguese and I am not habituated in the English language.
I was thinking on his problem, because I am going by a similar problem. EVM makes the complete collection, it shows LIMs, but it doesn't have anything inside of them.
To solve that problem I altered the value of the following parameter:

# How often will timer call handleUpdate and pollAlarm, in seconds
POLL-INTERVALL5 <--------this value is very low

and like this the agent snmp of AAU will wait for more time for the answer of the command, because I think the agent snmp is ordering a CNLIP in the middle of a command that still didn't receive answer, probably he is EXDDPIR=ALL;, make the alteration of 5 seconds for 30 seconds or more and tell me later what happened.

Ricardo.

 

[spacer73]

Hi, ricardosilvasantos!

Yes! After POLL-INTERVALL 90 I see LIMs. Thank you!

EVM not find TLU, RadioExchange, ext. in LIMs. But I think to solve this problem myself, I do changes any variables in mdconfig.cnf.

Once more thank you for help me.

/Andy/

 

[ricardosilvasantos]

I am happy for having helped.
It is quite so, if you change the values in mdconfig.cnf, you will have changes in the reading of MD110.
See you later.
Ricardo.