Emulate Nortel T7208 Phone Transfer

[g18c]

I am using a TCM-8 card with some Nortel T7208 handsets from an old Nortel system.

There is a transfer button that they used to transfer calls, buttons now need to be setup via user rights.

How can i emulate this transfer button is there anything special other than a transfer feature button?

 

[smokinjoe2938]

This is a IP Office forum

 

[vztech]

take a look at these

https://downloads.avaya.com/css/P8/documents/100164858

http://marketingtools.avaya.com/kno...dProjects/manuals/manuals/bst/Quick_T7208.pdf

It's only dialtone!!!

 

[sizbut]

They are talking IP Office. However the question is pretty dumb. The Transfer button feature is for a Transfer button on Nortel phones, it says so in the help.

Stuck in a never ending cycle of file copying.

 

[chrisag]

Just press feature *3 choose the button you want to program and feature 70.

 

[EmuDan]

In standard mode, the 2nd button from the top should be Transfer, by default. In basic mode, you cannot have a transfer button.

Dan

I blame Avaya.

 

[RLSbutton]

Any more feedback on this? I am curious if it works or not.

Joseph Sus Jr. Nortel Enthusiast