Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Emergency routing

Status
Not open for further replies.

Kaffe2012

Technical User
Mar 5, 2012
4
NO
Hi

I have ip-ext on different locations and they all share same public line. That means when call to emergency (Police) are connect to the same emergency center. If I know the directnumber to local emergency number, can I route emergency call direct. Any idea on how to do that? Can I use ip_domain with domain_name, cust and emenum?

Br,
 
Hi.

I would use AC parameter in Domain that is set up in PBX.
After that i would use DNT1 and DNT2 tables to steer where to connect mu calls.
In DNT1 i would check if dialed number is AC+112 if yes trunk away dialed number. If not fix in DNT2 table that you trunk away AC from dialed number.

Mpe
 
thanks

Can you help me with commands?

Form config file ip-ext get domain=sofia.hu

user normally dials 0112 for emergency center.
ED=0,srt=2.
Number to emergency center for this domain is: 34112280

I can use LC=19.
I have only 1 Mx-One.
Can you provide cmd ip_domain --area code xx
LCLDI
LCDDI
etc


Br,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top