I have to issues that may or may not be related.
I have a cx3-10c with 2 enclosures attached to it. We purchased a third enclosure from the documents I read this model can have 4 enclosures and up to 60 drives attached. When I connected the third enclosure I can not see it in navisphere, I only see the original two.
My other problem is that in navisphere the SP A show it as (unmanaged) but SP B is fine so i thought this should not have effected me adding the third enclosure.
When i look at faults in navisphere i see the following:
Faults Reported by SPA :
The SP is currently unreachable.
Faults Reported by SPB :
Enclosure SPE : Cabling information differs between SPs; may indicate disconnected cabinets.
Enclosure SPE : Faulted
Enclosure SPE SPS A : Removed
SP A : Removed
I have been search for a manual/user guide for this but I can't find anything.
Any help that can be provided either getting it to see the third enclosure or getting sp A working is greatly appreciated.
Thank you
I have a cx3-10c with 2 enclosures attached to it. We purchased a third enclosure from the documents I read this model can have 4 enclosures and up to 60 drives attached. When I connected the third enclosure I can not see it in navisphere, I only see the original two.
My other problem is that in navisphere the SP A show it as (unmanaged) but SP B is fine so i thought this should not have effected me adding the third enclosure.
When i look at faults in navisphere i see the following:
Faults Reported by SPA :
The SP is currently unreachable.
Faults Reported by SPB :
Enclosure SPE : Cabling information differs between SPs; may indicate disconnected cabinets.
Enclosure SPE : Faulted
Enclosure SPE SPS A : Removed
SP A : Removed
I have been search for a manual/user guide for this but I can't find anything.
Any help that can be provided either getting it to see the third enclosure or getting sp A working is greatly appreciated.
Thank you