Embedded Voicemail SoE 4.1.12

[AvayaSpec]

I have a problem with embedded voicemail . Suddenly it won’t work and you get at busy.
But I should see that there is 1 in VMAIL= even that is it at embedded card right?
Can the card be full?

817119mS PRN: LAW=A PRI=0, BRI=4, ALOG=4, ADSL=0 VCOMP=3, MDM=0, WAN=0, MODU=0 LANM=0 CkSRC=5 VMAIL=0(VER=2 TYP=3) CALLS=0(TOT=9)
817128mS LIST2: IFACE(5) "LAN1","LAN2","DialIn","RemoteAdmin","RemoteAdmin"

 

[TomMills]

in my experience when the card is full, it still works, it just won't let you leave messages, it will play the prompts then hang up, so i don't think thats it.

Tried reseating the card?

http://www.twitter.com/tem1985

ACSS-SME
fo shizzle ma nizzle.

 

[tlpeter]

Put it in a cardreader and see if it still works.


Homo sapiens non urinat in ventum

honey, i fried the IP Office !!!

Sarcasm, it's only one of the services I offer.

 

[Bas1234]

Or just try to re-insert the card.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[AvayaSpec]

I re-inserted the card again, rebooting the system and still the same?

 

[Bas1234]

In the Manager > System > Voicemail > check if EVM is selected in the pulldown menu.

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[AvayaSpec]

It worked fine until yesterday

 

[mattKnight]

Run a dte trace of the boot process



Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.