Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Embedded VM to email

Status
Not open for further replies.

gregl45

Technical User
Apr 4, 2006
230
US
I have a system that the vm to email quits working every so often. Usually a reboot will get it working again but not this time. I can ping the SMTP server through system status so my routes are correct and it was working previously. I have tried different servers that are working at other locations to send the emails but no go with that either. The system is on 5.0.22 and the prompts have been updated. I also hooked another IPO to the network 6.0.8 and it will not send either. This leads me to believe it is in the network somewhere but it is a small office and everything is directly int the switch on the ISP router. Could something in the router be blocking me? Any suggestions would be appreciated.
 
There was a bug in 5.0.15, so i think the problem is still in 5.0.22. Report it to your BP.

CQ40368 | EVM fails intermittently; restart clears (SMTP set up) | 5.0.15 | SP_RELEASE_4Q10_5.0

You could try to get private build 5.0.158407 it should be solved in there.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
I will try to get the PB but it will not send out on a 6.0 system either.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top