Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ELP6->LSP Error

Status
Not open for further replies.

victorsib

Technical User
Jun 13, 2006
4
RU
good day
can you help me with problem at time 5:51-05:52 in HIMDP and ALLOP logs.
this errors regular after SP7->SP8 update ;(
how a i can next step for diagnostic this trouble ?
i can TR measurements GJ trunks, but not found block or congestion conditions for gj-trunks


VERSION=CXP1010139/4/TSWSP08/R9A
9 LIMs

<himdp;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
11:59:07 27OCT18
DIAGNOSTICS FROM LIM 001, LAST HIREI: 02:15:03 27OCT18

TIME DATE ERROR CODE
10:52:15 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 001
TO LSP (H'054) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 6E E7 01 9D 01 4E F8 E7 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A
NO INFORMATION STORED IN LIM 002, LAST HIREI: 02:15:03 27OCT18
NO INFORMATION STORED IN LIM 003, LAST HIREI: 02:15:03 27OCT18
NO INFORMATION STORED IN LIM 004, LAST HIREI: 02:15:03 27OCT18
NO INFORMATION STORED IN LIM 005, LAST HIREI: 02:15:03 27OCT18
NO INFORMATION STORED IN LIM 006, LAST HIREI: 02:15:03 27OCT18
DIAGNOSTICS FROM LIM 007, LAST HIREI: 02:15:04 27OCT18

TIME DATE ERROR CODE
05:52:42 27OCT18 H'44
COMMUNICATION STATUS ERROR AT BUFFER TRANSFER
SEND ERRORS, DUPLEX MODE = 001
RECEIVE ERRORS, DUPLEX MODE = 000
SEND ERRORS, SIMPLEX MODE = 000
EXE A IN LIM 001

TIME DATE ERROR CODE
05:51:27 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 007
TO LSP (H'054) EXE A IN LIM 007
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 56 4B 01 9D 00 E1 F8 4B 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A

TIME DATE ERROR CODE
04:24:18 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 007
TO LSP (H'054) EXE A IN LIM 007
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 56 43 01 9D 00 E1 F8 43 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A
NO INFORMATION STORED IN LIM 008, LAST HIREI: 02:15:03 27OCT18
NO INFORMATION STORED IN LIM 009, LAST HIREI: 02:15:04 27OCT18

END

<allop;
ALARM LOG
IDENTITY: #
VERSION: CXP1010139/4/TSWSP08/R9A

DATE: 27OCT18 TIME: 11:59:53
CLASS: 2
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
27OCT18 05:53:00 5 1 001-0-60-00 106 390 0 7 1

LAST ALREI: 27OCT18, 02:15:05

END

<ioddp;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER TS2GCF2 IN SERVICE
SYSSUBFS11
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERMINAL1 001-0-60-2 - MML - 7
SYSN SYSTERMINAL2 001-0-60-3 - MML - 7
SYSN NET-CIL 001-0-60-4 - NETWORK/OUT IN SERVICE
SYSN NET1 001-0-60-4 - NETWORK/MML - 7
SYSN NET2 001-0-60-4 - NETWORK/MML - 7
SYSN NET3 001-0-60-4 - NETWORK/MML - 7
NODX - 004-1-22 - - IN SERVICE
NODX SYSDISK2 004-1-22-0 MASTER TRANSCE IN SERVICE
SUBFS11
SUBFS21
NODX NIU-IO 004-1-22-1 - MML - 7
NODX NIU-MIL 004-1-22-3 - OUT IN SERVICE
NODX NET-LIM4 004-1-22-4 - NETWORK/MML - 7
END


<cnbip:bpos=1-0-60;

DEVICE BOARD REVISION INFORMATION
DATE: 27OCT18 TIME: 12:07:37

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-60 NIU2 ROF 137 5396/2 R3A
CAA 1580021 R14A EXE
CAA 1580021 R13A OLD
CAA 112 2924 R14A EXE Boot
00 TS2GCF220I 20160713 1943 Mbytes
D2992930286216000060 Serial number

END

<cnbip:brdnam=sesboards, lim=all;

DEVICE BOARD REVISION INFORMATION
DATE: 27OCT18 TIME: 12:13:58

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001EXE LSU CAA112551 R9A
001EXE LSU CAA1125021 R20A
001EXE DSU0 CAA1125559 R8A
001EXE DSU1 CAA112555 R8A
002EXE LSU CAA112551 R9A
002EXE LSU CAA1125021 R20A
002EXE DSU0 CAA112555 R8A
002EXE DSU1 CAA112555 R8A
003EXE LSU CAA112551 R9A
003EXE LSU CAA1125021 R20A
003EXE DSU0 CAA112555 R8A
003EXE DSU1 CAA112555 R8A
004EXE LSU CAA112551 R9A
004EXE LSU CAA1125021 R20A
004EXE DSU0 CAA112555 R8A
004EXE DSU1 CAA112555 R8A
005EXE LSU CAA112551 R9A
005EXE LSU CAA1125021 R20A
005EXE DSU0 CAA112555 R8A
005EXE DSU1 CAA112555 R8A
006EXE LSU CAA112551 R9A
006EXE LSU CAA1125021 R20A
006EXE DSU0 CAA112555 R8A
006EXE DSU1 CAA112555 R8A
007EXE LSU CAA112551 R9A
007EXE LSU CAA1125021 R20A
007EXE DSU0 CAA112555 R8A
007EXE DSU1 CAA112555 R8A
008EXE LSU CAA112551 R9A
008EXE LSU CAA1125021 R20A
008EXE DSU0 CAA112555 R8A
008EXE DSU1 CAA112555 R8A
009EXE LSU CAA112551 R9A
009EXE LSU CAA1125021 R20A
009EXE DSU0 CAA112555 R8A
009EXE DSU1 CAA112555 R8A

END


<cnpip:unit=elp6;

PROGRAM UNIT INFORMATION
PU-NAME PU-NO PRODUCT NUMBER REV PATCH
ELP6 H'19D 8/CAA 111 8636/012 R12A YES
TYPE
B'0000 0000 0000 0000 0101 0011 0000 0000
TYPEEXT
B'0000 0000 0000 0000 1110 0000 0001 0011
LOADED IN LIM
1 2 3 4 5 6 7 8 9
END

<cnpip:unit=lsp;

PROGRAM UNIT INFORMATION
PU-NAME PU-NO PRODUCT NUMBER REV PATCH
LSP H' 54 7/CAA 111 457/01 R7A YES
TYPE
B'0000 0000 0000 0111 0000 0011 0000 0001
TYPEEXT
B'0000 0000 0000 0000 0000 0000 0000 0101
LOADED IN LIM
1 2 3 4 5 6 7 8 9
END
<pclop:unit=elp6;
PATCH LOG DATA

UNIT: ELP6 LIM: 1
CI TYPE STATUS SIZE IA/SIGNO/ADDR CORRSTART
S115802A PROGRAM CONF 34 0000E2E6 00019DF8
S115802A PROGRAM CONF 34 0000E342 00019E1A
S115802A PROGRAM CONF 82 000083D2 00019E3C
S115911A DS DATA CONF 34 00000007 00019E8E
S115911A PROGRAM CONF 60 00000C54 00019EB0
S115911A PROGRAM CONF 148 000016E8 00019EEC
S115911A PROGRAM CONF 42 00001806 00019F80
S115911A PROGRAM CONF 52 000019DA 00019FAA
S115911A PROGRAM CONF 60 00012D68 00019FDE
S115911A PROGRAM CONF 52 000133D6 0001A01A
S115911A PROGRAM CONF 38 000134CE 0001A04E
S115892A PROGRAM CONF 48 00016DB6 0001A074
S115949A PROGRAM CONF 44 00016528 0001A0A4
S115977A PROGRAM CONF 34 000124AC 0001A0D0
S115977A PROGRAM CONF 34 000124D6 0001A0F2
S115977A PROGRAM CONF 34 00012590 0001A114
S115977A PROGRAM CONF 122 00000C6A 0001A136
END

<pclop:unit=lsp;
PATCH LOG DATA

UNIT: LSP LIM: 1
CI TYPE STATUS SIZE IA/SIGNO/ADDR CORRSTART
S114943A PROGRAM CONF 42 000080A8 0000BA6E
END
 
hi so what is problem?? 10number himdp is nothing....send hiedp

PG4E
 

inlsp05, problem in himdp at 7Lim
05:52:42 27OCT18 H'44
05:51:27 27OCT18 H'13
..

and new with hiedp

<hiedp;
TIME DATE
02:47:01 28OCT18
LIM EVENTS OVERWRITTEN OLDEST EVENT NEWEST EVENT LAST HIREI
EVENTS
001 3 0 20:06:10 27OCT18 00:00:18 28OCT18 12:03:28 27OCT18
002 1 0 17:02:56 27OCT18 17:02:56 27OCT18 12:03:28 27OCT18
003 0 0 12:03:29 27OCT18
004 1 0 00:01:51 28OCT18 00:01:51 28OCT18 12:03:29 27OCT18
005 0 0 12:03:29 27OCT18
006 1 0 21:54:21 27OCT18 21:54:21 27OCT18 12:03:29 27OCT18
007 1 0 20:06:55 27OCT18 20:06:55 27OCT18 12:03:29 27OCT18
008 0 0 12:03:29 27OCT18
009 1 0 22:28:21 27OCT18 22:28:21 27OCT18 12:03:29 27OCT18

END


<himdp;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
02:48:38 28OCT18
DIAGNOSTICS FROM LIM 001, LAST HIREI: 12:03:28 27OCT18

TIME DATE ERROR CODE
00:00:18 28OCT18 H'44
COMMUNICATION STATUS ERROR AT BUFFER TRANSFER
SEND ERRORS, DUPLEX MODE = 001
RECEIVE ERRORS, DUPLEX MODE = 000
SEND ERRORS, SIMPLEX MODE = 000
EXE A IN LIM 007

TIME DATE ERROR CODE
23:33:21 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 001
TO LSP (H'054) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 62 4B 01 9D 01 D2 F8 4B 00

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A

TIME DATE ERROR CODE
20:06:10 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 001
TO LSP (H'054) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 62 FB 01 9D 01 D2 F8 FB 00
STACK ADDRESS = 020081D2
SIGNAL SEND ADDRESS = 0200E376

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A
DIAGNOSTICS FROM LIM 002, LAST HIREI: 12:03:28 27OCT18

TIME DATE ERROR CODE
17:02:56 27OCT18 H'43
SIGNAL TRANSMISSION ERROR
SIGNAL CHECKSUM ERROR
NO INFORMATION STORED IN LIM 003, LAST HIREI: 12:03:29 27OCT18
NO INFORMATION STORED IN LIM 004, LAST HIREI: 12:03:29 27OCT18
NO INFORMATION STORED IN LIM 005, LAST HIREI: 12:03:29 27OCT18
DIAGNOSTICS FROM LIM 006, LAST HIREI: 12:03:29 27OCT18

TIME DATE ERROR CODE
21:54:21 27OCT18 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 020365EC
BRANCHVALUE = 0011006E
ENTER
SWSW A-LEVEL SIGNAL CTMOUTA (H'00EB)
FROM EXS (H'003) EXE A IN LIM 006
TO CTLP (H'173) EXE A IN LIM 006
NUMBER OF DATA BYTES IN SIGNAL = 5
WITH 0 1 2 3 4 5 6 7 8 9
000 01 40 1D 00 0E

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 02 7E 50 02 02 FE 54 02 02 35 F4 02 00 4B 34
DIAGNOSTICS FROM LIM 007, LAST HIREI: 12:03:29 27OCT18

TIME DATE ERROR CODE
20:06:55 27OCT18 H'44
COMMUNICATION STATUS ERROR AT BUFFER TRANSFER
SEND ERRORS, DUPLEX MODE = 001
RECEIVE ERRORS, DUPLEX MODE = 000
SEND ERRORS, SIMPLEX MODE = 000
EXE A IN LIM 006
NO INFORMATION STORED IN LIM 008, LAST HIREI: 12:03:29 27OCT18
DIAGNOSTICS FROM LIM 009, LAST HIREI: 12:03:29 27OCT18

TIME DATE ERROR CODE
22:28:21 27OCT18 H'13
FAULTY POINTER
LOGICAL PROGRAM ERROR ADDRESS = 020072F0
ENTER
SWSW A-LEVEL SIGNAL DISCONNECTSF (H'003C)
FROM ELP6 (H'19D) EXE A IN LIM 009
TO LSP (H'054) EXE A IN LIM 009
NUMBER OF DATA BYTES IN SIGNAL = 10
WITH 0 1 2 3 4 5 6 7 8 9
000 02 6F 08 01 9D 00 99 F8 08 00
STACK ADDRESS = 020081D2
SIGNAL SEND ADDRESS = 0200E376

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 10 3A

END


VERSION: CXP1010139/4/TSWSP08/R9A

DATE: 28OCT18 TIME: 02:45:13
CLASS: 3
85 BUFFER TRANSFER HAS FAILED
DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4
27OCT18 20:07:10 6 1 001-0-60-00 106 390 0 7 1


 
yes ! waht is the problem now in lim7?? ats |?

PG4E
 

inlsp05

The problem is that sometimes, when calling subscribers, when there is a connection fall into the void, and do not hear each other.
 
hi
since like gs problem also external clock not set .... fix external clcok first then start find gs problem.like pcm link restart and internal clock in gs so conect to gcu2 and seen log.


PG4E
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top