Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Electra Elite - How to program DND button? 2
- Thread starter taxigirl
- Start date
-
2
- #2
chrislebeck
Vendor
you have to go to program 4-12 in order to assign a button that does both
1>on whatever phone that needs it, you'll need the port number of that phone. feature 4 on that phone will tell you in the display
2>get into programming
3>goto program 4-12
4>conference to get to the port you found above
5>transfer to get to the button number that needs dnd
6>hit recall to go to page 2
7>press linekey 5
8>transfer to write
9>speaker to get out of programming
10>test
1>on whatever phone that needs it, you'll need the port number of that phone. feature 4 on that phone will tell you in the display
2>get into programming
3>goto program 4-12
4>conference to get to the port you found above
5>transfer to get to the button number that needs dnd
6>hit recall to go to page 2
7>press linekey 5
8>transfer to write
9>speaker to get out of programming
10>test
- Thread starter
- #3
chrislebeck
Vendor
sure you do....there is no way to not be able to get into programming if you are on site
- Status
