I have an Electra 8/24 (aka Ranger?) and am looking for some install or service documentation. Anybody know where to go?. I am not use to the Key Systems and am very current on newer PBX products (Especially InterTel). Is the 8/24 Computer programmable. If so software and cables would be a great thing. Help!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ELECTRA 8/24 HELP!!!! 1
- Thread starter jbroyles
- Start date
-
1
- #2
- Thread starter
- #3
FNC+Hold+*# to get into program mode on port 10 or 11 only
Comes up on the display OFF-LINE PROG
KEY10+02from keypad and the line keys which light up ring on port10 toggle on or off by pressing line keys Press Mic key and data is stored and it increments to port 11 and so on. For night ring mode prog is Key10+03
Comes up on the display OFF-LINE PROG
KEY10+02from keypad and the line keys which light up ring on port10 toggle on or off by pressing line keys Press Mic key and data is stored and it increments to port 11 and so on. For night ring mode prog is Key10+03
- Status
