ELAN 2

[travellinglite]

In LD 143, when I type enl elan, i get this
CCBR000
.enl elan
CCBR008 Missing argument(s)
I am trying to find out the elan address for each of my PBX i have.
thanks

 

[bigindian65]

go to ld 48 and .stat elan

Mato' Was'aka

 

[travellinglite]

This what I get :

>LD 48
LNK000
.STAT ELAN

SERVER TASK: DISABLED

how do i fix?

 

[bigindian65]

enl elan in that load

Mato' Was'aka

 

[phonz1]

ld 143 is ELNK. are you running Call Pilot or Symposium??

 

[travellinglite]

ok, that worked, thanks. In ld 48 i will find the elan address?

 

[travellinglite]

Both, CallPilot an Symposium

 

[travellinglite]

i have been ask for the elan address and settings for each PBX we have for OTM to be installed.

 

[bigindian65]

if you have both, ideally, you should have elan 16 & 17, but just statting it in 48, if it/they are up will give you the IP.

Mato' Was'aka

 

[travellinglite]

ELAN #: 016
APPL_IP_ID: 10 .0 .74 .5 LYR7: ACTIVE EMPTY APPL ACTIVE
ELAN #: 017
APPL_IP_ID: 10 .0 .74 .10 LYR7: ACTIVE EMPTY APPL ACTIVE
This is out of the CS1000M I have, that part is working, with OTM it is asking me for the elan address for each CS1000B I have, and the same for the OPT 11C I have. Each site reports back to a central C.P. for v/m. And the CCM server is local, and the callcenters report to it.

 

[allenmac]

If you want the E-LAN address of the PBX (Call Server):

LD 117

PRT ELNK

The entry marked "Active" is your PBX.