joebickley
Programmer
Hi i have 2 hard drives withs an OS on each. These drive are not partitioned. The master HD is Windows XP and need to be the default. The second is Win 2000 Server. I know how to make a new item appear on the boot list but i cant get it to work. (both work fine on there own)
heres what the 2 lines look like
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Win XP" /fastdetect
multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Win 2000" /fastdetect
Basically all i did was copy the line that was allready there in win XP but i think my changeing the disk number has done it.
Also when i do this neither of the HDs will boot at all
Please Help
Thanks
Joe
heres what the 2 lines look like
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Win XP" /fastdetect
multi(0)disk(1)rdisk(0)partition(1)\WINDOWS="Win 2000" /fastdetect
Basically all i did was copy the line that was allready there in win XP but i think my changeing the disk number has done it.
Also when i do this neither of the HDs will boot at all
Please Help
Thanks
Joe