Edge Transport Service Hung - HELP!

[ilceres]

Hi to all

I have a strange and urgent problem: my edge transport server's Transport Service hung on start.

With a manual start it start correctly, and all look ok, eventviewer is clean

BUT IT DON'T WORK!

if I telnet the server on port 25 and try to send a mail, it respond: "OK, mail queud", but the queue viewer in Exchange is empty

No mail reach the Inbox.

I googled the problem but without result
Somebody can help?

Mauro

 

[58sniper]

So the queue viewer on the Edge box doesn't show anything? What about the logs? Check the protocol logs, tracking logs, etc.

Pat Richard MVP
Plan for performance, and capacity takes care of itself. Plan for capacity, and suffer poor performance.

http://www.ucblogs.net/blogs/exchange/

 

[ilceres]

Correct, in telnet test I received "message queued" but I can't see nothing in Queue Viewer....

Last Send Logs is this morning at 9.02 GMT+1 (6 hours ago), Receive Log is logging, last logs are:

EDGE,08CBDA70584540A8,18,192.168.200.5:25,192.168.0.216:4479,>,250 2.1.0 Sender OK,
2009-07-24T12:52:21.796Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,19,192.168.200.5:25,192.168.0.216:4479,<,RCPT TO:<tfb59@brescianigroup.it>,
2009-07-24T12:52:21.796Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,20,192.168.200.5:25,192.168.0.216:4479,>,250 2.1.5 Recipient OK,
2009-07-24T12:52:21.812Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,21,192.168.200.5:25,192.168.0.216:4479,<,BDAT 5784 LAST,
2009-07-24T12:52:22.031Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,22,192.168.200.5:25,192.168.0.216:4479,>,250 2.6.0 <B8C6EBECC53D1B459D417A6FAE2CF6C117B22DC1@EXCHSRV.ate.lan> Queued mail for delivery,
2009-07-24T12:52:22.031Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,23,192.168.200.5:25,192.168.0.216:4479,<,QUIT,
2009-07-24T12:52:22.031Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,24,192.168.200.5:25,192.168.0.216:4479,>,221 2.0.0 Service closing transmission channel,
2009-07-24T12:52:22.031Z,EDGESRV\(2) HUB > EDGE,08CBDA70584540A8,25,192.168.200.5:25,192.168.0.216:4479,-,,Local

Looks like the server can reiceve, accept the message but can't send....
but i can't see nothinq in queue!

There is another way than Queue Viewer to check the message queue?