Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ECM 5.0 Terminal Session wont Work

Status
Not open for further replies.

coameno

Programmer
Nov 21, 2009
56
US
I have an ECM 5.0 and when I create a terminal session via mgc or sig server or call server I get the java loaded but when I hit connect it won't work. Is there another way to get to the tty command line secure other than the tty ports?
 
You can SSH to your signaling server, then cslogin from the signaling server. the SSH will be secured on your network, and the cslogin will initiate an rlogin on the ELAN from the SS to the PBX.

Matthew - Technical Support Engineer Sr.
 
What is the command you use on our laptop and from where, DOS prompt?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top