Situation: VPN line/IP trunk is succesfully establihed between IP403 and Definity, everything is working properly only there is an echo on IP4606 phones. Can anything be done about this matter? Also, when setting VPN line the "enable faststart" checkbox is checked, should this be done also with VPN extention? There is also "enable faststart" check box.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
echo on IP4606 phones
- Thread starter mmaki
- Start date
AFAIK fast start is an Avaya tweak to the h232 protocol & may not work with different systems.
check which compression protocols are in use. Also makle sure thet direct media path is enabled, this should remove the IPO from the loop once the call has been setup.
check which compression protocols are in use. Also makle sure thet direct media path is enabled, this should remove the IPO from the loop once the call has been setup.
- Status
Similar threads
