Jan 25, 2019 #1 trilogy8 Technical User Jan 26, 2017 413 US Anyone face a situation where ec500 was still sending calls to the mapped number even when disabled?
Jan 25, 2019 #2 avayatech2018 Technical User May 22, 2018 53 US Can you do a list trace on the station and verify what's happening? I assume that would show that information. 40 years in Telecom. New to Avaya! Go easy. Upvote 0 Downvote
Can you do a list trace on the station and verify what's happening? I assume that would show that information. 40 years in Telecom. New to Avaya! Go easy.
Jan 28, 2019 #3 gwmyers Technical User Oct 13, 2011 583 US CM6.3 G450 S8700 station extension application country code phone number config set trunk selection mapping mode calls allowed 2075 EC500 XXX XXX 4222 1 ars BOTH all because IP 2075 is paired with XXX XXX 4222 whether the EC500 is ON or OFF the calls always show the IP 2075 TRACE calling from cell phone XXX XXX 4222 calling an IP phone XXX XXX 1359 TRACE SHOWS active station 2075 cid dial 1359 ring station 1359 cid 1359 and 2075 are same customer Upvote 0 Downvote
CM6.3 G450 S8700 station extension application country code phone number config set trunk selection mapping mode calls allowed 2075 EC500 XXX XXX 4222 1 ars BOTH all because IP 2075 is paired with XXX XXX 4222 whether the EC500 is ON or OFF the calls always show the IP 2075 TRACE calling from cell phone XXX XXX 4222 calling an IP phone XXX XXX 1359 TRACE SHOWS active station 2075 cid dial 1359 ring station 1359 cid 1359 and 2075 are same customer