Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EC500 stopped working after switch to 10 digit dialing

Status
Not open for further replies.

joe7476

Vendor
Nov 30, 2016
4
US
We got an area code overlay that requires 10 digit dialing for all local numbers. Went in and changed all the numbers in station mapping. When I run a trace on the call it is only sending 8 digits. Calling the cell number directly works fine. I can't find where it is stripping out the last 2 digits.

Anybody have an idea what I am missing?
 
Did you add the new 10 digit numbers (or 11 digits if forwarding to a long distance#) in System Manager Elements/Routing/Dial Patterns?
routingsample.jpg


We have a template saved that we copy for EC500 and just fill in the number to forward to and make it 10 or 11 digits depending. Some of that may already need to be set up as far as your SBCs and what-not. Sorry if I'm not explaining it well, I'm more of an experienced user who can follow instructions than I am guru like these guys in here.

Cool Hand Luke said:
"Dyin'? Boy, He can have this little life any time He wants to. Do Ya hear that? Are ya hearin' it? Come on. You're welcome to it, Ol' Timer. Let me know You're up there. Come on. Love me, hate me, kill me, anything. Just let me know it... I'm just standin' in the rain talkin' to myself."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top