Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EC500 -Self Administration Feature 1

Status
Not open for further replies.

mattKnight

Programmer
May 10, 2002
6,225
GB
I am testing EC500 as an option for our business. I have it working reasonably well for extending to mobile (I haven't yet started on FNE cofiguration etc)

I've configured an ec500 Self-Administration code (*75), which works well. In fact a little too well... Using this *75 code I can change any configured EC500 destination from a handset (as if doing a change off-pbx station-mapping) .

This can't be right, I'd expect that I'd need to enter the station login code to be able to this, but it just works!

If this is correct operation, I simply can't use the feature - which makes it a PITA to administer...

I've check the system-parameters security page and Station Security Code for Terminal Self-Administration Required is set to y

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
Oops forgot this might be useful!

CM 5.2 and IP handsets - 9630s (all stations have codes)

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
Do you have console permissions on for the COS for the sattion your testing from?
 
rwallot

The answer to your question is yes!

That was the issue
Thanks for the help

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top