I setup EC500 for an extension and setup the off-PBX Mapping but when I call........it says...........you have reached a non working number an when it is activated and I test it and when it is deactivate it, it works normal. It is a 2410 (If that means anything)
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
EC500 - Question
- Thread starter LJRing444
- Start date
AvayaTier3
Technical User
post your off-pbx station-mapping
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Thread starter
- #4
Station Application Dial CC Phone Number Trunk Config Dual (Page 1)
Extension Prefix Selection Set Mode
454-8305 EC500 - 7246500113 aar 1
Station Appl Call Mapping Calls Bridged Location (Page 2)
Extension Name Limit Mode Allowed Calls
454-8305 EC500 2 both all both
Extension Prefix Selection Set Mode
454-8305 EC500 - 7246500113 aar 1
Station Appl Call Mapping Calls Bridged Location (Page 2)
Extension Name Limit Mode Allowed Calls
454-8305 EC500 2 both all both
- Thread starter
- #6
- Status
