Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EC500 - Question

Status
Not open for further replies.

LJRing444

Technical User
Sep 13, 2013
32
US
I setup EC500 for an extension and setup the off-PBX Mapping but when I call........it says...........you have reached a non working number an when it is activated and I test it and when it is deactivate it, it works normal. It is a 2410 (If that means anything)
 
list trace station xxxx ?

"Trying is the first step to failure..." - Homer
 
post your off-pbx station-mapping

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Station Application Dial CC Phone Number Trunk Config Dual (Page 1)
Extension Prefix Selection Set Mode
454-8305 EC500 - 7246500113 aar 1

Station Appl Call Mapping Calls Bridged Location (Page 2)
Extension Name Limit Mode Allowed Calls
454-8305 EC500 2 both all both
 
thank you...I will make the change and try it again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top