I have read several post on this thread regarding EC500 and Caller ID, but none seem to work for me.
The problem I am having is a little hard to explain:
If somebody calls my extension directly (DID number or by calling our main Number and entering my extension at the prompt) the Caller Id info is displayed correctly on my desktop phone and my Cell phone just fine. The problem comes is when somebody is transferred to me either by another coworker or the operator. My desktop phone shows correctly the caller ID information of the transferred call. The problem is my Cell phone show's the extension of the person who transferred the called to me and but the Caller ID info and displayed on my desktop phone.
Is it possible to have the Caller ID info pasted on to the cell phone like it does when they call me directly?
Here is a copy of List trace station 2503 (Xmobile Number) when a call is transferred to my extension from the operator/coworker.
LIST TRACE
time data
15:20:52 dial 92
15:20:52 term trunk-group 5 cid 0x140
15:20:52 dial 92689212
15:20:52 route-pattern 2 preference 1 cid 0x140
15:20:52 seize trunk-group 5 member 21 cid 0x140
15:20:52 Setup digits 2689212
15:20:52 Calling Number & Name 2200 NO-CPName
15:20:53 Proceed trunk-group 5 member 21 cid 0x140
15:20:58 Alert trunk-group 5 member 21 cid 0x140
15:21:05 active station 2503 cid 0x13f
15:21:05 idle trunk-group 5 member 2 cid 0x13f
List Trace station 2503 (When caller calls me directly)
LIST TRACE
time data
15:27:47 dial 92
15:27:47 term trunk-group 5 cid 0x15b
15:27:47 dial 92689212
15:27:47 route-pattern 2 preference 1 cid 0x15b
15:27:47 seize trunk-group 5 member 21 cid 0x15b
15:27:47 Setup digits 2689212
15:27:47 Calling Number & Name xxx5051050 NO-CPName
15:27:48 Proceed trunk-group 5 member 21 cid 0x15b
15:27:52 Alert trunk-group 5 member 21 cid 0x15b
15:27:57 active station 2503 cid 0x15a
15:28:00 idle station 2503 cid 0x15a
Any Help would be very greatful.
Thanks
Joey
The problem I am having is a little hard to explain:
If somebody calls my extension directly (DID number or by calling our main Number and entering my extension at the prompt) the Caller Id info is displayed correctly on my desktop phone and my Cell phone just fine. The problem comes is when somebody is transferred to me either by another coworker or the operator. My desktop phone shows correctly the caller ID information of the transferred call. The problem is my Cell phone show's the extension of the person who transferred the called to me and but the Caller ID info and displayed on my desktop phone.
Is it possible to have the Caller ID info pasted on to the cell phone like it does when they call me directly?
Here is a copy of List trace station 2503 (Xmobile Number) when a call is transferred to my extension from the operator/coworker.
LIST TRACE
time data
15:20:52 dial 92
15:20:52 term trunk-group 5 cid 0x140
15:20:52 dial 92689212
15:20:52 route-pattern 2 preference 1 cid 0x140
15:20:52 seize trunk-group 5 member 21 cid 0x140
15:20:52 Setup digits 2689212
15:20:52 Calling Number & Name 2200 NO-CPName
15:20:53 Proceed trunk-group 5 member 21 cid 0x140
15:20:58 Alert trunk-group 5 member 21 cid 0x140
15:21:05 active station 2503 cid 0x13f
15:21:05 idle trunk-group 5 member 2 cid 0x13f
List Trace station 2503 (When caller calls me directly)
LIST TRACE
time data
15:27:47 dial 92
15:27:47 term trunk-group 5 cid 0x15b
15:27:47 dial 92689212
15:27:47 route-pattern 2 preference 1 cid 0x15b
15:27:47 seize trunk-group 5 member 21 cid 0x15b
15:27:47 Setup digits 2689212
15:27:47 Calling Number & Name xxx5051050 NO-CPName
15:27:48 Proceed trunk-group 5 member 21 cid 0x15b
15:27:52 Alert trunk-group 5 member 21 cid 0x15b
15:27:57 active station 2503 cid 0x15a
15:28:00 idle station 2503 cid 0x15a
Any Help would be very greatful.
Thanks
Joey