Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

e911 on rls 7 where to start

Trason

MIS
May 6, 2005
86
US
We are being required to start using E911 at our location. Is there somewhere I can go read/watch about how to get started with this? It was my understanding that i could do basic locations like: Building A floor 1, Building A floor 2. Does the CS1000 allow you to send out a regular call id for normal outbound calls and a 2nd separate call id for 911?
 
On release 7, ESA is configured in overlay 24, and a few other locations. I would read through the ESA documentation, but I would not mess with this without a partner for legal reasons. Even if you have to pay someone, it is better safe than sorry, especially here in the US, where there are more lawyers than doctors.
 
Mark Fletcher used to post a lot of info on the subject on youtube but like gbtac3 says you are best to have a good idea what you are doing as requirements differ on a site by site basis.
 

Part and Inventory Search

Sponsor

Back
Top