Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E911 caller id, what do i need

Status
Not open for further replies.

mike101876

Technical User
Mar 23, 2006
28
US
I am trying to allow the caller id to pass between my opting 11 to a mitel PBX. currently i have a point to point TIE line connecting them. what is the best solution to allow my system to pass the caller id on a 911 call to the Mitel. do i need a pri instead. the option 11 is a remote node and there are severalother systems that are connected to the mitel.
 
Thank you, I also have another question to this, this is a dual cabinet option 11 and i have a spare dti/pri card on hand. is it possible for me to build this PRI as a second connection and later remove the tie line or would it be best to convert the tie to what i need, please keep in mind i am completly unexperienced at working on pri circuits.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top