Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E7 on PosReady 2009 ? 1

Status
Not open for further replies.

bellab

Technical User
Jan 6, 2019
25
BZ
I have a client that purchase a Workstation 5 from eBay . The machine came with PosReady2009 installed . How do I install Micros e7 4.1 on this machine .
 
I have not found a way to install e7 on POS ready. Only Windows CE as far as I can tell. I ran into the same thing and the supplier was able to switch out with a CE device, but you may be out of luck when it comes to ebay.
 
WinCE or PosReady is on chip on board known as the UDOC. The OS drive for the terminal. You can swap it for a CE UDOC and bios setting to be changed.
Last I bought a UDOC it was $60 ish?
 
Wow I can do that where did u find the UDOC ? Can I pull from wk4 and place in wk5 or no ?
 
you need to purchase the UDOC for the specific workstation model from your micros dealer. $60-$70US
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top