Hi all,
I have Win2k SP2 Server with Arcserve 2K SP3 running on it. Connected to that computer is an HP Surestore DLT Autoloader 818 running the latest firmware.
In Arcserve the backups seem to be fine, however I get this error every second in the Job status.
E6084 Drive Hardware Error-Servo or Sensor [ABSL:1060 CMD:4DH]
The CA website simply says to contact the hardware vendor. I have done this and after several tests HP decided to replace the entire unit. That done, I still get the error so I replaced the SCSI card in the server, I still get the error.
The only thing I have left to replace are the cables but before I spend any more money I thought I would ask...
...Can anybody help me with this, please?
Thanks in advance for any help.
Paul I plug you in, dim the lights
Electric Barbarella !
I have Win2k SP2 Server with Arcserve 2K SP3 running on it. Connected to that computer is an HP Surestore DLT Autoloader 818 running the latest firmware.
In Arcserve the backups seem to be fine, however I get this error every second in the Job status.
E6084 Drive Hardware Error-Servo or Sensor [ABSL:1060 CMD:4DH]
The CA website simply says to contact the hardware vendor. I have done this and after several tests HP decided to replace the entire unit. That done, I still get the error so I replaced the SCSI card in the server, I still get the error.
The only thing I have left to replace are the cables but before I spend any more money I thought I would ask...
...Can anybody help me with this, please?
Thanks in advance for any help.
Paul I plug you in, dim the lights
Electric Barbarella !