Dynamic VPN access through vpn spoke

[llneverfollowll]

Hi,

Currently I have a PIX 515E with a Site to site to VPN concentrator. There is also a Dynamic vpn config on the PIX515 allowing user to create a connection to the pix. I was wondering if i could also allow the VPN software clients to have access to what is behind the VPN3005 since there is a site to site between that same pix and the VPN3005. I tried adding the IP pool that is handed out to the pix crypto acl as well as on the 3005 under traffic managment, but no luck. Your help is appreciated. Thanks

 

[llneverfollowll]

If anyone is having problems with this you must upgrade to version 7 IOS or higher:

http://www.cisco.com/en/US/products..._guide_chapter09186a0080450beb.html#wp1042114