DUSYI problem

[fikyu]

hello,
i have problem with dusyi command
the message is
FALIED IN LIM001 TIMEOUT FROM BUP

what is the problem?
thanks in advance

 

[rfpui]

hi
BUP is a program name
This program handles dump fucion
Can you send DUBDP and what is printout?

Try to restart BUP program
RFPUI:UNIT=BUP,LIM=1;

 

[fikyu]

Yes I can send dubdp and that ok with it. just showing rel. 1 and 2 and
failed dusyi commands that I send already

tried with restarting bup unit but the it is the same message

 

[whosrdaddy]

Hi,

check your erroglog first :

himdp:lim=1;

paste it thread. and then we'll see...

--------------------------------------
What You See Is What You Get

 

[fikyu]

ok.....

<HIMDP:LIM=1;

DIAGNOSTICS FROM OPERATING SYSTEM
TIME DATE
19:32:28 24MAY04
DIAGNOSTICS FROM LIM 001

TIME DATE ERROR CODE
19:31:29 24MAY04 H'14
JUMP TO ILLEGALSTATE
LOGICAL PROGRAM ERROR ADDRESS = 02006948
BRANCHVALUE = 00000000
ENTER
SWSW B-LEVEL SIGNAL BUPINTERNAL2 (H'0021)
FROM BUP (H'032) EXE A IN LIM 001
TO BUP (H'032) EXE A IN LIM 001
NUMBER OF DATA BYTES IN SIGNAL = 22
WITH 0 1 2 3 4 5 6 7 8 9
000 02 88 9C 58 02 80 02 00 03 00
010 34 00 03 00 36 00 93 E9 00 00
020 08 00
STACK ADDRESS = 00000000
SIGNAL SEND ADDRESS = 020046F8

USER STACK DUMP
0 1 2 3 4 5 6 7 8 9 A B C D E F
02 00 47 5C

END

 

[whosrdaddy]

seems like BUP had some trouble dumping unit data,
do you have any alarms? (allop);

you can always try to restart main dump programs :

RFPUI:UNIT=DRDM&DRDH&DRDR,LIM=1;



--------------------------------------
What You See Is What You Get