DUSYI info

[TheCurious]

When you start DUSYI, sometimes system does backup of all program units, sometimes not.

What is the rule? In which case the system will do the dump of program units to HDU?

just curious...



The Curious

 

[pawshman]

It depends what changes have been done, an example.

What program units have been changed and what information in the LIMs have been changed.

good question but dont worry !

 

[whosrdaddy]

full dump will be done after system startup (lalr) or system restart (rfexi).
if not, the MD110 dumps only program units if they were changed, this can be : patches, unit swap (pcasi,lapur/lapul,fcpli)
lim data is always dumped (L000x files in Sx directories)

--------------------------------------
What You See Is What You Get

 

[HIREI]

Also, after
BLEQI:EQU=1-0-60-0;
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
/* HDU1 power off */
/* HDU change */
/* HDU2 power on */
IOSIE:NODE=SYSN,IODEV=SYSDISK1;
IOSII:NODE=SYSN,IODEV=SYSDISK1,SUBFS=SYSSUBFS11&SYSSUBFS21,SIPOS=3;
FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;
BLEQE:EQU=1-0-60-0,ALLFM=YES;
we always have full dump on DUSYI.