Dusyi Command 1

[activenew]

Hello All,

I wrote the date error on my system, but you corrected. after this when run Dusyi Command i got below result kindly check and advise me accordingly :



<DUSYI;
SYSTEM DUMP INFORMATION
NOT POSSIBLE TO DUMP CHANGED PROGRAM CODE
WAIT FOR DUMP TO LOCAL BACKUP
RESULT OF DUMP TO LOCAL BACKUP
SUCCESSFUL
RESULT OF EXTERNAL BACKUP UPDATE

PRODUCT IDENTITY FILE DUMPED
STATION IDENTITY FILE DUMPED
I/O LIM PROGRAM FILE DUMPED
PROGRAM TIME DATE
EXS 15:43 26SEP16
PRP 15:43 26SEP16
PRH 15:43 26SEP16
TFH 15:43 26SEP16
TFM 15:43 26SEP16
TFR 15:43 26SEP16
HLH 15:43 26SEP16
HLP 15:43 26SEP16
TWP2 15:43 26SEP16
ICM 15:43 26SEP16
PFM 15:43 26SEP16
LFM 15:44 26SEP16
OCM 15:44 26SEP16
SWDB1 15:44 26SEP16
SWDB2 15:44 26SEP16
DRDH 15:44 26SEP16
DRLH 15:44 26SEP16
DRDM 15:44 26SEP16
DRLM 15:44 26SEP16
DRDR 15:44 26SEP16
DRLR 15:44 26SEP16
CIM 15:44 26SEP16
CIH 15:44 26SEP16
LBH 15:44 26SEP16
INR 15:44 26SEP16
INM 15:44 26SEP16
BUP 15:44 26SEP16
IOH 15:44 26SEP16
OSD 15:44 26SEP16
OSH 15:44 26SEP16
DCSP 15:44 26SEP16
DCSH 15:44 26SEP16
GSH 15:44 26SEP16
GSP 15:44 26SEP16
EDH 15:44 26SEP16
FAM2 15:44 26SEP16
SIP 15:44 26SEP16
FIH 15:44 26SEP16
FIP 15:44 26SEP16
IPP 15:44 26SEP16
LSH 15:44 26SEP16
LSP 15:44 26SEP16
LSSUP 15:44 26SEP16
NIP 15:44 26SEP16
TWP3 15:44 26SEP16
GFH 15:44 26SEP16
GFM 15:44 26SEP16
GFR 15:44 26SEP16
SIH 15:44 26SEP16
SIR 15:44 26SEP16
ECM 15:44 26SEP16
ECR 15:44 26SEP16
REM1 15:44 26SEP16
REM2 15:44 26SEP16
RER 15:44 26SEP16
GAM 15:44 26SEP16
SAH 15:44 26SEP16
GAR 15:44 26SEP16
LCH 15:44 26SEP16
LCR 15:44 26SEP16
MCP 15:44 26SEP16
PTH 15:44 26SEP16
PTP 15:44 26SEP16
PIM 15:44 26SEP16
PIR 15:44 26SEP16
CNH1 15:44 26SEP16
CNH2 15:44 26SEP16
DCP 15:44 26SEP16
LISH 15:44 26SEP16
ALM 15:44 26SEP16
ALH1 15:44 26SEP16
ALH2 15:44 26SEP16
ALR 15:44 26SEP16
PAM1 15:44 26SEP16
PAR 15:44 26SEP16
PHH 15:44 26SEP16
PHR 15:44 26SEP16
SNMM 15:44 26SEP16
SNMN1 15:44 26SEP16
SNMC1 15:44 26SEP16
SDM 15:44 26SEP16
SDR 15:44 26SEP16
SGM 15:44 26SEP16
SGR 15:44 26SEP16
LDH 15:44 26SEP16
LDIM 15:44 26SEP16
LDRM 15:44 26SEP16
DDEM 15:44 26SEP16
DDER 15:44 26SEP16
DDGM 15:44 26SEP16
DDGR 15:44 26SEP16
DHH 15:44 26SEP16
DLP1D 15:44 26SEP16
DLP1M 15:44 26SEP16
DLP1N 15:44 26SEP16
DLP1T 15:44 26SEP16
DLP2 15:44 26SEP16
DMGM 15:44 26SEP16
DMGR 15:44 26SEP16
MGP1 15:44 26SEP16
MGHH 15:44 26SEP16
ACHH 15:45 26SEP16
ANHH 15:45 26SEP16
DAAP 15:45 26SEP16
DABP 15:45 26SEP16
DACP 15:45 26SEP16
DAGP 15:45 26SEP16
DANP 15:45 26SEP16
DATP 15:45 26SEP16
DBP 15:45 26SEP16
DGP 15:45 26SEP16
GHH 15:45 26SEP16
GPP 15:45 26SEP16
CTLMP 15:45 26SEP16
CTLP 15:45 26SEP16
CXHH 15:45 26SEP16
DED 15:45 26SEP16
DER 15:45 26SEP16
DPM 15:45 26SEP16
DPR 15:45 26SEP16
EHH 15:45 26SEP16
ELDP 15:45 26SEP16
ELLP 15:45 26SEP16
ELP6 15:45 26SEP16
ELP7 15:45 26SEP16
ELP8 15:45 26SEP16
GEH 15:45 26SEP16
IPHH 15:45 26SEP16
IPLP 15:45 26SEP16
IPLD 15:45 26SEP16
ITP 15:45 26SEP16
ITHH 15:45 26SEP16
ITLP 15:45 26SEP16
IVHH 15:45 26SEP16
IVLP 15:45 26SEP16
IWSP 15:45 26SEP16
KHH 15:45 26SEP16
KLP1D 15:45 26SEP16
KLP1L 15:45 26SEP16
KLP1M 15:45 26SEP16
KLP1O 15:45 26SEP16
KLP1T 15:46 26SEP16
MSHH 15:46 26SEP16
MSLP 15:46 26SEP16
NDBP 15:46 26SEP16
PGP1 15:46 26SEP16
PGP2 15:46 26SEP16
PGP3 15:46 26SEP16
PGHH 15:46 26SEP16
PEHH 15:46 26SEP16
PRHH 15:46 26SEP16
PRLP 15:46 26SEP16
PEP 15:46 26SEP16
PMLP 15:46 26SEP16
REHH 15:46 26SEP16
RELP 15:46 26SEP16
COM 15:46 26SEP16
DOM 15:46 26SEP16
DOR 15:46 26SEP16
OHH 15:46 26SEP16
OLP1D 15:46 26SEP16
OLP1T 15:46 26SEP16
CGP 15:46 26SEP16
CHH 15:46 26SEP16
CLP 15:46 26SEP16
CLHH 15:46 26SEP16
CLOM 15:46 26SEP16
CLOP 15:46 26SEP16
CSTHH 15:46 26SEP16
DCTAP 15:46 26SEP16
DCTPP 15:46 26SEP16
DIM 15:46 26SEP16
DIR 15:46 26SEP16
IDP 15:46 26SEP16
IHAH 15:46 26SEP16
IHH 15:46 26SEP16
ILCP 15:46 26SEP16
ILNP 15:46 26SEP16
MWP 15:46 26SEP16
RA1M 15:46 26SEP16
RA1R 15:46 26SEP16
RA1EP 15:46 26SEP16
RA1DP 15:46 26SEP16
RHH 15:46 26SEP16
SSH 15:46 26SEP16
SSM 15:46 26SEP16
TMM1 15:46 26SEP16
TMM2 15:46 26SEP16
TMR 15:46 26SEP16
TMHH 15:46 26SEP16
ACP 15:46 26SEP16
ADP 15:46 26SEP16
AHH 15:46 26SEP16
AIP 15:46 26SEP16
AIPN 15:46 26SEP16
AOM1 15:46 26SEP16
AOM2 15:46 26SEP16
AOR 15:46 26SEP16
AOHH 15:46 26SEP16
ASH 15:46 26SEP16
SNMA1 15:46 26SEP16
AUM1 15:46 26SEP16
AUM2 15:46 26SEP16
AUR 15:46 26SEP16
AUR1 15:46 26SEP16
AUHH 15:46 26SEP16
AWDB 15:46 26SEP16
BMP 15:46 26SEP16
CMP 15:46 26SEP16
FTP 15:46 26SEP16
IMP 15:46 26SEP16
MAH 15:46 26SEP16
MMP 15:46 26SEP16
MPP 15:46 26SEP16
TCP 15:46 26SEP16
NAP 15:47 26SEP16
NHH 15:47 26SEP16
NIH 15:47 26SEP16
QMP 15:47 26SEP16
RMP 15:47 26SEP16
ROM 15:47 26SEP16
ROR 15:47 26SEP16
SCP 15:47 26SEP16
SUH 15:47 26SEP16
TDBP 15:47 26SEP16
TRP 15:47 26SEP16
TSP 15:47 26SEP16
ADEP 15:47 26SEP16
DRAHH 15:47 26SEP16
DRALP 15:47 26SEP16
DTM 15:47 26SEP16
DTR 15:47 26SEP16
EAP1 15:47 26SEP16
EAP2 15:47 26SEP16
DSSP 15:47 26SEP16
LRH 15:47 26SEP16
LRP1 15:47 26SEP16
LRP2 15:47 26SEP16
LRP3 15:47 26SEP16
LRP4 15:47 26SEP16
LRP5 15:47 26SEP16
LRP6 15:47 26SEP16
LRP7 15:47 26SEP16
MFP3 15:47 26SEP16
NUD 15:47 26SEP16
NUH 15:47 26SEP16
PNR 15:47 26SEP16
SLP60 15:47 26SEP16
TLP1 15:47 26SEP16
TLP11 15:47 26SEP16
TLP12 15:47 26SEP16
TLP17 15:47 26SEP16
TLP19 15:47 26SEP16
TLP22 15:47 26SEP16
TLP25 15:47 26SEP16
TLP30 15:47 26SEP16
TLP35 15:47 26SEP16
TLP37 15:47 26SEP16
TLP49 15:47 26SEP16
TLP50 15:47 26SEP16
TLP58 15:47 26SEP16
TLP60 15:47 26SEP16
TLP65 15:47 26SEP16
TLP96 15:47 26SEP16
THH 15:48 26SEP16
VCHH 15:48 26SEP16
VCP 15:48 26SEP16
VCTP 15:48 26SEP16
MHH 15:48 26SEP16
SYH 15:48 26SEP16

DATA TIME DATE
LIM001 15:48 26SEP16

WAIT FOR DUMP TO EXTERNAL LOCAL BACKUP
RESULT OF DUMP TO EXTERNAL LOCAL BACKUP
SUCCESSFUL
WAIT FOR CHECK READING OF RELOAD DIRECTORY
CHECK READING SUCCESSFUL
BACKUP DATE INFORMATION FILE DUMPED
UPDATE OF EXTERNAL BACKUP FINISHED
LOAD OF STANDBY SIDE HAS BEEN ORDERED

ORDERED

SPONTANEOUS PRINTOUT

LOAD OF STANDBY CONTROL SYSTEM INFORMATION

LOADED LIMS FAILED LIMS ADDITIONAL INFORMATION
1
END


Thanks in advance

 

[fcpli]

Check your duplicated side (if any)

 

[lanpham_imported]

Hi
You type DCSSP Command to check system duplicated and you find the error!
and DUBDP command.
You can type DUSYI again.
Brs!

 

[activenew]

thanks for reply ,

this command result:
<DCSSP;
CONTROL SYSTEM INFORMATION

LIM CSSIDE A CSSIDE B BLOCKWORD
1 EXECUTING STANDBY

BLOCKWORD:
B0= MANUAL
B1= FAULTMARKED
B2= SYSTEM
B3= UNLOAD
B4= INTERNAL
B5= LOADBLOCK
B6= NO CONTACT
B7= VACANT
END

<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL2 REL1
14:45 12JUL06 15:42 26SEP16
LOCAL BACKUP
NO LIM WITH DIVERGENT TIME AND DATE

STANDBY SIDE
NO LIM WITH DIVERGENT TIME AND DATE

END

I think there is error on date "14:45 12JUL06" instead of 16 typed 06 to correct this


Thanks

 

[activenew]

How to fix his issue?

 

[himdp]

How to fix his issue? " What issue? If you mean the date on REL2 being 10 years ago, then do another DUSYI and it will be overwritten.

 

[lanpham_imported]

You see file log of dump before, is there same that?
you type CADAP command, is date good?

 

[activenew]

date is good:
<CADAP;
CALENDAR DATA
IDENTITY=CAD
VERSION=CXP1010104/4/TSWSP07/R8B
12:58:17
THU 29 SEP 2016
END

 

[activenew]

is this normal ? this my question

 

[himdp]

Hi activenew, your prints look OK to me. Your next DUSYI will overwrite REL2 and you will then have no dumps with the incorrect date.

 

[lanpham_imported]

Hi, your CADAP is good. You wait next DUSYI and you print DUBDP command!

 

[activenew]

Is must be run dusyi manually? Or this happens automatically.
NOTE: After a power failure the time on the system is incorrect.

 

[himdp]

DUSYI is manual backup.
You can run an automatic backup with DUFQI.
See if this is already done with DUFQP;
To initiate do DUFQIATE=2016-10-04,TIME=02-00,INT=24;
This will perform a system backup each day (24 hours) at 2:00 AM starting on 4th October.
To end this do DUFQE;

 

[snor]

Hi,
I think you have a Problem with the "DATE" File of REL2.
Take a look to the DUBDP printout.
EXTERNAL BACKUP
LATEST PREVIOUS
REL2 REL1
14:45 12JUL06 15:42 26SEP16

Your latest dump is from "12JUL06", and the "older" one from 26SEP16

check this with
fidapath=/sysn/usr1/ses/dr/rel1/*.*;
fidapath=/sysn/usr1/ses/dr/rel2/*.*;

One possible solution might be to delete the DATE-file of REL2 and make a DUSYI again.

If this do not work, take a new flash-disk, create subfilesystems, format and mount the subfilesystems and do DUSYI.
BLEQI..
FIMOE..
IOSIE..
..Change Flash disk
IOSII..
FICRI..
FIMOI..
BLEQE..

best regards,
Norbert

 

[activenew]

Your are right the problem with date ,

i want confirm there is any impact if ran this command:


fidapath=/sysn/usr1/ses/dr/rel1/*.*;
fidapath=/sysn/usr1/ses/dr/rel2/*.*;

my knowledge not much

Thanks again

 

[himdp]

fidap is just a print command so no impact. It will print the files in the reload directories.

 

[snor]

P.S.
Little correction : REL2 is placed in /usr2/
correct:

fidapath=/sysn/usr2/ses/dr/rel2/*.*;

 

[activenew]

thanks for reply
check the result command:

<fidapath=/sysn/usr1/ses/dr/rel1/*.*;
FILE/DIRECTORY DATA
FILE FITYPE LINKS USERID FISIZE DATE
P D 1 2 4320 04OCT16 17:28
S1 D 1 2 16 03JAN11 04:05
S2 D 1 2 0 03JAN11 04:01
S3 D 1 2 0 03JAN11 04:01
S4 D 1 2 0 03JAN11 04:01
S5 D 1 2 0 03JAN11 04:01
PID F 1 2 12420 04OCT16 17:23
SID F 1 2 50 04OCT16 17:23
IOPUF F 1 2 2615 04OCT16 17:23
DATE F 1 2 7 04OCT16 17:29
END


< fidapath=/sysn/usr1/ses/dr/rel2/*.*;
NOT ACCEPTED
FILE/DIRECTORY DOES NOT EXIST

 

[activenew]

please save my job guys.

 

[snor]

fidapath=/sysn/usr2/ses/dr/rel2/*.*;