DUMPING PROBLEM

[642234]

Hi Guys,
I have BC12SP7.While dumping the system GETTING COMMAND LOST after some time. Please advise. All the pcm links are ok also i restart programme units DRDR,DRDM,DRDH,INR but still problem
<dusyi;
SYSTEM DUMP INFORMATION
NOT POSSIBLE TO DUMP CHANGED PROGRAM CODE
RESULT OF PASSIVE COMMON FUNCTIONS UPDATE
SUCCESSFUL
WAIT FOR DUMP TO LOCAL BACKUP
RESULT OF DUMP TO LOCAL BACKUP
SUCCESSFUL
RESULT OF EXTERNAL BACKUP UPDATE

COMMAND LOST

 

[doktor]

Try also to restart DRLH and FIP&NIP, if you are using a NIU board.
Also restart the NIU.

///doktor

 

[642234]

HiDokter,

I have restart these also but still same. Please advise

 

[tech345ind]

check the internal clocking for the system

 

[PG191]

hi guy
did you try command
SFCEI;
after that DUSYI; again
best regard

 

[aviator051]

YOU SHOULD REPLACE NIU BOARD.

 

[andrels69]

HI,

This message comes as a warning in some cases when the backup is scheduled periodical, but as you mention that I enter this information in "lost command" attempts to restart the program units that are related to backup as follow below;
DUP units, DCSH, DRDH, DRDM, DRDR, CLHH,

Do not operate without SFC.
Another tip would you post here in the forum HIMDP commands to see which units are and losing.

André Luís - Proud to be Brazilian

 

[whosrdaddy]

Maybe we should ask the OP if this problem is already solved?? this thread dates from februari...

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[andrels69]

NOT SFC and SFCEI yes.