Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

dumb question 2

Status
Not open for further replies.

briand200

Technical User
Dec 6, 2007
7
GB
I have a (potentailly) dumb question or two...

When logged into a Definity system via the cli using a modem can you locked the Defiity modem by ungraciously disconnecing?

Also, again using cli, how can disply page 2 when displaying a dial plan?

CHeers
 
1 - in rare cases, you can lock up the modem line by disconnecting incorrectly

2 - you can look at page 2 only if something is programmed there.

3 - there are no dumb questions, only stupid answers
 
If you are using ASA there is a All of these buttons show up on the top of the Emu screen when appropriate. If you are using something like putty or another Emu here is the F Key Commands.
These keys work in ASA Enulation as well.

Command F Key name
Cancel F1
Refresh F2
Enter F3
Clear Field F4
Help F5
Go To Page F6
Next Page F7
Previous Page F8
 
Thanks for the info, much appreciated.

I think there was a page 2 but what ever key I pressed it just didn't want to display.

So I've ungraciously disconnected from the modem...fingers crossed I can still access the switch.

 
Hi! Thanks for the info.

I think there must have been something strange going on as I tried the F7 button and nothing was happening.

CHeers
 
I can log back into the Definity modem but I'm getting a blank screen instead of password prompt any ideas greatly welcome!
 
Sadly that doesn't work...if I haven't used 4410 as terminal type is there any way I can get round this one?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top