Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dumb DT exp unit

Status
Not open for further replies.
Apr 17, 2007
24
GB
i have a dt16 that does not see the head unit,
when i connect via the dte port the HT screen says "waiting for backplane clock"

any ideas anyone?

cheers

osk
 
Disconnect the power of all modules and main unit, reboot all modules wait until the are green power up the main unit.

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
sorry, i should have posted that I have done all the usual.

the unit is displaying "normal behaviour" in that it powers up with green led, and the info spews out of the dte port.
when the handsets are plugged in they display index.
behaviour of an exp unit that does not see the head unit.

the port on the back of the unit must be faulty,(quite a rare thing)

just thought i may be able to do some kind of magic via the dte port!


 
What IPO do you have and what firmware is it running?

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
Try the unit on a different port and see if it works then
Maybe the port on the back of the 403 is bad


RTFM.gif



ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
as i say,
done all the usual,

i have 3 different ip403's in my lab,

dt unit behaves the same on each one regardless of the port,

the unit responds via the dte port so ithought there may be somekind of comand or file that i could send it that it may be looking for,

the commands that i have been sending are "work! you f******g B*****d"

 
yeah already tried that.....

spent far too much time on this peice of crap!

i have decided to cut the unit up into small bits and spread the remains around hertfordshire

rest in pieces you B*****d unit!
 
the last unit that died in my old office, i dropped it down the rack a bit and used it as a shelf. lol.

Never argue with an idiot. bystanders won't be able to tell the difference.
 
Wasn't a 500 then, they feel like they are about to shear the bolts/screws by themselves :)

ACS - IP Office Implement

"I'm just off to Hartlepool to buy some exploding trousers
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top