Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DTR Card
- Thread starter gbriggs
- Start date
techman3030
MIS
Digitone receiver card, ld 34 to out dtr then pull the card, but it is there for a reason, you need it for your analog phones and ports.
another problem you may run into.. they are real easy to out and put back in.. just be sure you change a buffer (any) in param and ini the switch after your finished.. you'll see why, 1000 err's per minute makes it hard to type, and tends to ini the switch.. even if you out it and put it back in the same place... make the change to a param so the switch will see a change and reload that file.. can you say reg delete...
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
TheWorkingMan
Vendor
Wrong!!! You out the DTR is LD 13.
REQ: OUT
TYPE: DTR
TN: xx-xx-xx-xx
TWM
REQ: OUT
TYPE: DTR
TN: xx-xx-xx-xx
TWM
You can disable the dtr in ld 34 not out as TWM said. What type of switch are you talking about. It is different from an Option 11 to the bigger options. Also if you out all the dtrs, your T1s working work any more as the receive the digits from the co.
- Status
Similar threads
- Locked
- Question