Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTR card swap question

Status
Not open for further replies.

mike101876

Technical User
Mar 23, 2006
28
US
I have a DTR card that seem to be floking out. whenever i run a test i will get errors on about 1/2 the ports and i get alot of errors all the time for one port in particular (err070 20 1 13 6) i have a spare card and would like to swap it out. is it as easy as disabling the card and replacing it or is there more to it. thanks
 
Yes, that's all you have to do but it sounds like possible patch I had the same problem

OLD ROLMEN WORKING ON NORTELS
 
we are on release 23, can we still get a patch for this?
 
on that rls you don't need a patch, that patch was much later.. just ld 32 disc 20 1 13 and enlc 20 1 13.. test

john poole
bellsouth business
columbia,sc
 
thanks all, unfortunatly i went to the site this morning and swapped out the card and found that the spare i had was bad and could not be brought up. NPR0326 no response from card. so i will need to get another spare, the old card came up just fine when i put it back in(though it is still sending out errors).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top