Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTMF and DT phones

Status
Not open for further replies.

raknas

Technical User
May 4, 2004
276
GB
Has anybody encountered the following:
I have a site IP403DT 2.0(16)
2x DT16 2.0(16)
1x pots8 2.0(16)
VMpro 2.0(16)
When you make a call from a dt phone say to an external Auto Attendant or to a number that requires you to send DTMF tones on some occasions when you press a digit you cannot hear the DTMF tones only if you press the PROGRAM button then the required digit will it be heard an sent.
 
Is that sank, asking the question. Sorry if its not?
 
The system usualy only sends DTMF to outbound calls, inbound calls do not recived DTMF because the system will assume you are trying to use the dial ahead feature.
pressing programm overides this function & sends DTMF if required.

If you are haveing dificulty Dialing DTMF to an outbound call then I suspect somthing is fooling the system into thinking you are on an inbound call, I have seen call recording do this on an INDeX switch but have not actualy tested on an IPO
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top