Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTI card as PRI

Status
Not open for further replies.

farazat

MIS
Jul 25, 2010
6
PK
Hi all i have following engineering code DTI card installed in 11c rls 5.5
Can i use that card as PRI card also?? by installing D channel daughter board and clock controller

DTI card engineering code NTAK100002

regards
 
What is the model of the card?
If you could use it as a PRI card also it would say DTI/PRI
 
The NTAK10 is for 2MB DTI only for 2MB PRI one of the following cards can be used.

NTAK79 2.0 Mb PRI card
NTBK50 2.0 Mb PRI card

The difference between the two PRI cards is the ability of the NTBK50, when equipped with the NTBK51 D-channel daughterboard, to download software onto the card. This feature is based on the MSDL platform and essentially replaces the D-channel circuit on the NTAK79 PRI card. (The NTAK79 PRI card does not support the NTBK51 Downloadable D-channel handler daughterboard.)

A second difference between the NTAK79 and NTBK50 2.0 Mb PRI cards is that the NTAK79 has an on-board clock controller while the NTBK50 supports the NTAK20 clock controller daughterboard.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top