DTA019 - Is this critical?

[ttdredd1]

My event log is full of DTA019 error on loop 2 since Friday evening. I performed a rcnt today and everything seems to be fine. Is this local or from the CO?

PRI TRK LOOP 2
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -001
CRC -000
LOSFA -101
0S_BPV -000
OS_LOSFA -000
OS_YEL -000

PRI* TRK LOOP 2 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - BUSY DID 3VCE * CH 02 - IDLE DID 3VCE *
CH 03 - IDLE DID 3VCE * CH 04 - IDLE DID 3VCE *
CH 05 - IDLE DID 3VCE * CH 06 - BUSY DID 3VCE *
CH 07 - IDLE DID 3VCE * CH 08 - IDLE DID 3VCE *
CH 09 - BUSY DID 3VCE * CH 10 - IDLE DID 3VCE * CH 11 - BUSY DID 3VCE * CH 12 - IDLE DID 3VCE *
CH 13 - IDLE DID 3VCE * CH 14 - IDLE DID 3VCE *
CH 15 - IDLE DID 3VCE * CH 16 - IDLE DID 3VCE *
CH 17 - IDLE DID 3VCE * CH 18 - IDLE DID 3VCE *
CH 19 - IDLE DID 3VCE * CH 20 - IDLE DID 3VCE *
CH 21 - IDLE DID 3VCE * CH 22 - IDLE DID 3VCE *
CH 23 - IDLE DID 3VCE * CH 24 - DCH 0
.

 

[bigindian65]

frame alignment errors reach critical. If you do not have a constant spit out of that, should be okay. Looks like there was some attenuation on the line at some point and it was cleared or self cleared. Keep an eye on it for a few. The errors have gone away right?

 

[ttdredd1]

Thank you for the info.

They have stopped for now. What concerns me when looking at the log is that it has ocurred at least 8 times per minute. Since I did a rcnt, I have not seen anymore. Looking at the times, it happened in the middle of the night each night since Friday and stopped during the evening hours.

very wierd, but I will keep an eye on it.

Thanks!