DT900 to Std-SIP firmware 1

[Bakana]

Hello!

Did anyone have this firmware? Can't find it anywhere. Also tried an IP Phone Manager with no success.

Phone cannot download firmware (with NEC-SIP to Std-SIP checkbox) via IPM.

 

[belevedere]

If you provide an email address, I can send you a dropbox link to get it. It's too large to post here.

 

[Bakana]

Can you please send it.

 

[Bakana]

Short log of issue below -

2021/05/13 16:04:37 : [info ] Hit ITL Default Model[DT920(6D/12D)]
2021/05/13 16:04:37 : [info ] Download file /itkssipe.tgz from xxx.xxx.xxx.xxx
2021/05/13 16:04:37 : [info ] Download syn message to xxx.xxx.xxx.xxx::3530 succeeded
2021/05/13 16:04:38 : [info ] Download ack message from xxx.xxx.xxx.xxx::3530 succeeded
2021/05/13 16:04:44 : [info ] Download fin message from xxx.xxx.xxx.xxx::3530 succeeded
2021/05/13 16:04:44 : [warn ] xxx.xxx.xxx.xxx unknown error when downloading

For history.

 

[belevedere]

Look for an email.

 

[Bakana]

Thank you!

 

[texdev]

Hello, please send email to:

johnforum1014@gmail.com

Greatly appreciated

 

[belevedere]

Done, look for email.

 

[belevedere]

Done

 

[Irwin Paul]

Thank you, greatly appreciated!

 

[fissure]

Hi belevedere,

would very much appreciate the files to converged.nec@gmail.com

thanks

 

[belevedere]

Done.

 

[Jackcmann]

Hi

Please could you tell me the difference between NEC SIP and STD SIP?

 

[belevedere]

NEC is a proprietary protocol only usable on NEC systems.

 

[Jackcmann]

Hi Belevedere

Correct me if im wrong. From previous posts i have seen the std SIP firmware can be installed on the DT700 handsets and then can be used on other pbx brands?

 

[belevedere]

Yes, that is true.

 

[Jackcmann]

Hi Belevedere

Please could you kindly send me the STD SIP firmware for the NEC DT 800 series
technical@gsmsolutions.co.za

 

[bwal4212]

Hi Belevedere

Would you still have a copy of the STD SIP Firmware for NEC DT900 series?

bwal4212@gmail.com

Thanks!

 

[belevedere]

Jackcmann
bwal4212
Check your email.

 

[DMovin]

Hi Belevedere.

Do you have a copy of the NEC DT800s and DT900s Std-SIP Firmwares?
In specific the itzisipvg.tgz for the DT830.

if you have them, can you send them to soporte@movinet.cl ?

Thanks for help us!