DT700 connect to SV8100 from outside

[jeroentjed]

Hi guys,
Is it possible to connect a DT700 on another location to the SV8100?
In the phone I changed the ip address under SIP/Server Address & URI to the IP address of the location where the SV8100.
On that location I checked there is a port forward to the SV8100.
Anything else I have to do?

Thanks for thinking with me,

regards,
Jeroen

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[belevedere]

See attached document.

 

[jeroentjed]

Thanks Belevedere,
I see Note 1: The NAPT (Network Address Port Translation) requires a license pre-loaded to the CP00. License code 0031 must have a quantity of 1 and can be confirmed with CM 10-50-01 or via PCPro or WebPro.
I really hate the licence based system.
There are no new licences available anymore for SV8100 So there is no way to upgrade my system, right?

By the way: On my terminals the NAT Traversal option under SIP Settings are greyed out.

Phoning Dutchman - NEC SV8100 - Your help is greatly appreciated

 

[belevedere]

I'm afraid without an upgrade to the SV9100 or replacement to the SL2100 you are SOL with regard to licenses.