tsr9010461
Technical User
ll DECT (Only DT 422) stpped functioning. Tried restart of related PUs even at last RFEXI with12 LIM system BC11/SP11 but no solution. Anybody with an idea Pls.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DT 422 1
- Thread starter tsr9010461
- Start date
- Status
- Thread starter
- #22
tsr9010461
Technical User
<SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT
It is ISDN connection (VOIP)
<cnbip:bpos=3-1-30;
DEVICE BOARD REVISION INFORMATION
DATE: 04AUG04 TIME: 15:57:04
BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND
003-1-30 TLU76 ROF1375338/1 R7A
END
And RPN are in the same LIM
FPI = 13 BPOS = 003-2-50
RPN OPERATING STATE BLOCKING STATE
1 OPERABLE NOT BLOCKED
2 OPERABLE NOT BLOCKED
3 OPERABLE NOT BLOCKED
4 OPERABLE NOT BLOCKED
5 OPERABLE NOT BLOCKED
6 OPERABLE NOT BLOCKED
7 OPERABLE NOT BLOCKED
8 OPERABLE NOT BLOCKED
All magzines are LBP 20
Cheers !
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT
It is ISDN connection (VOIP)
<cnbip:bpos=3-1-30;
DEVICE BOARD REVISION INFORMATION
DATE: 04AUG04 TIME: 15:57:04
BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND
003-1-30 TLU76 ROF1375338/1 R7A
END
And RPN are in the same LIM
FPI = 13 BPOS = 003-2-50
RPN OPERATING STATE BLOCKING STATE
1 OPERABLE NOT BLOCKED
2 OPERABLE NOT BLOCKED
3 OPERABLE NOT BLOCKED
4 OPERABLE NOT BLOCKED
5 OPERABLE NOT BLOCKED
6 OPERABLE NOT BLOCKED
7 OPERABLE NOT BLOCKED
8 OPERABLE NOT BLOCKED
All magzines are LBP 20
Cheers !
- Thread starter
- #24
tsr9010461
Technical User
Hi 1 Rfpui, we have four rpn initiated in LIM 3
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 11111 NORM
END
<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 11111 NORM
END
<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00001 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END
Hi
If I good see the problem is with synchronization
Printout of CXCFP :FPI= is not correct.
Now from alex parameter synch info
D5D4D3D2D1
When a system installation has been completed, i.e. all ELU31 boards have been initiated, and all synchronization cables have been connected, the following applies:
D 1 and D 2 are always set to 1 (xxx11).
D 3 and D 4 (TX/RX ring strap) are set to 1 for the RING MASTER and all RING MEMBERs (x11xx).
D 5 (Bus cable) is set to 1 for the RING MEMBER or RING MASTER and the BUS SLAVE if BUS cables are used in the magazine (1xxxx).
Your printout should be look as below
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 01111 NORM
END
<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END
Are you using external synchro cable between board 3-2-40 to 3-2-42 to 3-2-50 to 3-2-52
If yes it is a problem. probably you have this connections because
Board 003-2-40 synch info =11111
D5=1
Next what I see is a sari number
I’m not sure but if I remember from course sari 12345678 is an test number end can be used only for system with one ELU31 board.
rfpui
PS
Look to Process TGML under submit post button and find how to send monospaced text
It is better to read and look printout from MD on this forum
If I good see the problem is with synchronization
Printout of CXCFP :FPI= is not correct.
Now from alex parameter synch info
D5D4D3D2D1
When a system installation has been completed, i.e. all ELU31 boards have been initiated, and all synchronization cables have been connected, the following applies:
D 1 and D 2 are always set to 1 (xxx11).
D 3 and D 4 (TX/RX ring strap) are set to 1 for the RING MASTER and all RING MEMBERs (x11xx).
D 5 (Bus cable) is set to 1 for the RING MEMBER or RING MASTER and the BUS SLAVE if BUS cables are used in the magazine (1xxxx).
Your printout should be look as below
<cxcfp:fpi=13;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=6;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
6 003-2-40 123457BF 4 0 0 RING MASTER 01111 NORM
END
<cxcfp:fpi=14;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
END
<cxcfp:fpi=9;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
END
Are you using external synchro cable between board 3-2-40 to 3-2-42 to 3-2-50 to 3-2-52
If yes it is a problem. probably you have this connections because
Board 003-2-40 synch info =11111
D5=1
Next what I see is a sari number
I’m not sure but if I remember from course sari 12345678 is an test number end can be used only for system with one ELU31 board.
rfpui
PS
Look to Process TGML under submit post button and find how to send monospaced text
It is better to read and look printout from MD on this forum
- Thread starter
- #26
tsr9010461
Technical User
Hi ! Thanks everyone for their tips, but the problem is still there and Present situation is this:
CXCFP:FPI=ALL;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
3 004-0-52 123457BA 3 3 0 RING MASTER 01111 NORM
5 005-0-40 123457BC 1 0 0 RING MASTER 01111 NORM
6 003-2-40 123457BF 5 0 0 RING MASTER 01111 NORM
7 007-0-22 123457BE 3 0 0 RING MASTER 01111 NORM
8 006-1-40 123457B1 5 3 0 RING MASTER 01111 NORM
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
10 010-0-50 123457B0 2 0 0 RING MASTER 01111 NORM
11 011-0-20 123457B3 1 0 0 RING MASTER 01111 NORM
12 012-0-40 123457B2 1 0 0 RING MASTER 01111 NORM
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
15 007-0-62 123457B6 1 0 0 RING MASTER 01111 NORM
END
CNBIP:BPOS=3-2-40;
DEVICE BOARD REVISION INFORMATION
DATE: 06AUG04 TIME: 14:37:54
BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND
003-2-40 ELU31 ROF1375412/1 R2B
CAA 158 0010 R9A EXE
00 KRCNB 301 03/1 R1
CAH/KRCNB 301/3 R1G 1 EXE
CAH/KRCNB 301/3 R1G 3/02 EXE
01 KRCNB 301 03/1 R3
R3C 2 R3C 2 EXE
CXCNB 101 108/3 R3E 3/06 EXE
02 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
03 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
04 KRCNB 201 03/1
CAH/KRCNB 201/2 R2B R2B 0 EXE
CAH/KRCNB 201/2 R2B R2B 1/01 EXE
END
SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT
END
note : Except LIM 3 all are remote LIMs where FPIs are sitting.
* for TGML tip
Cheers
img
CXCFP:FPI=ALL;
CORDLESS EXTENSION COMMON FIXED PART DATA
SARI = 12345678
FPI BPOS PARI RFP TRM DELAY SYNCH ROLE SYNCH INFO MODE
3 004-0-52 123457BA 3 3 0 RING MASTER 01111 NORM
5 005-0-40 123457BC 1 0 0 RING MASTER 01111 NORM
6 003-2-40 123457BF 5 0 0 RING MASTER 01111 NORM
7 007-0-22 123457BE 3 0 0 RING MASTER 01111 NORM
8 006-1-40 123457B1 5 3 0 RING MASTER 01111 NORM
9 003-2-42 123457A8 2 0 0 BUS SLAVE 00011 NORM
10 010-0-50 123457B0 2 0 0 RING MASTER 01111 NORM
11 011-0-20 123457B3 1 0 0 RING MASTER 01111 NORM
12 012-0-40 123457B2 1 0 0 RING MASTER 01111 NORM
13 003-2-50 123457AB 8 0 0 BUS SLAVE 00011 NORM
14 003-2-52 123457AA 6 0 0 BUS SLAVE 00011 NORM
15 007-0-62 123457B6 1 0 0 RING MASTER 01111 NORM
END
CNBIP:BPOS=3-2-40;
DEVICE BOARD REVISION INFORMATION
DATE: 06AUG04 TIME: 14:37:54
BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND
003-2-40 ELU31 ROF1375412/1 R2B
CAA 158 0010 R9A EXE
00 KRCNB 301 03/1 R1
CAH/KRCNB 301/3 R1G 1 EXE
CAH/KRCNB 301/3 R1G 3/02 EXE
01 KRCNB 301 03/1 R3
R3C 2 R3C 2 EXE
CXCNB 101 108/3 R3E 3/06 EXE
02 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
03 KRCNB 301 03/1 R2
R3B 2 R3B 2 EXE
CXCNB 101 108/3 R3B 3/06 EXE
04 KRCNB 201 03/1
CAH/KRCNB 201/2 R2B R2B 0 EXE
CAH/KRCNB 201/2 R2B R2B 1/01 EXE
END
SCEXP;
EXTERNAL SYNC RECEIVING LINES DATA
MASTER LIM STATUS [MASTER SCOPE]
FIRST CHOICE 3-1-30-0 SYNC RECEIVING
SECOND CHOICE NOT PRESENT
THIRD CHOICE NOT PRESENT
END
note : Except LIM 3 all are remote LIMs where FPIs are sitting.
* for TGML tip
Cheers
img
Hi
Your DT 422 are can’t registered in only LIM 3 area or in another LIM, too?
You have two ELU 31 boards in LIM 7 FPI=7 and 15 why this both board’s have synch role 01111?
Rfpui
Thanx for little *
But lesson two.
If You send by this forum printout from fiol use MonoSpaced option.
Square bracket (left) tt square bracket (right)
Copy from memory /fiol/ to text window
Square bracket (left) /tt square bracket right
Your DT 422 are can’t registered in only LIM 3 area or in another LIM, too?
You have two ELU 31 boards in LIM 7 FPI=7 and 15 why this both board’s have synch role 01111?
Rfpui
Thanx for little *
But lesson two.
If You send by this forum printout from fiol use MonoSpaced option.
Square bracket (left) tt square bracket (right)
Copy from memory /fiol/ to text window
Square bracket (left) /tt square bracket right
- Thread starter
- #28
tsr9010461
Technical User
Hi ! Rfpui
LIM 7 is at a distant location I will be going there tomorrow and let you know.
Chao !
LIM 7 is at a distant location I will be going there tomorrow and let you know.
Chao !
- Thread starter
- #29
tsr9010461
Technical User
Sorry ! Problem is still unresolved with all LIMs in terms of registration.
- Thread starter
- #31
tsr9010461
Technical User
We tried both ways you mentioned. There is a last resort to change LSU sitting in LIM3, we gonna do this weekend. This SARI is there eversince we installed DECT telephony with 368 type about three years ago.
- Status
Similar threads
- Locked
- Question