dsx160 programming

[whender]

I have a customer with a DSX160 system. The cup does not have an ethernet cable. It has a AUX rj45 connector and something that resembles a PS2 connector. On the back of the board the PS2 like connect has dtr, cts etc. This seems to mbe a com port but I cannot find the correct connector. No other i/o devices are on the system.

How do you conncet to the system to program?

Thanks,

Wayne

 

[MrComputerTelephony]

Go to

http://www.necii.com

for info...you also need a 8 pin to DB-9 connector to plug into the DB-9 com port on back of your laptop/pc with the DSX programming software.....

 

[ttech]

From your description, They have a DS2000

# P/N 80893 - Cable, Din8 to Mod8 Plug, 10 foot
# P/N 85980 - Adapter, DB9 Female to Mod8

 

[RCTelecom]

USB cable