DST-Daylight Savings Time 1

[jrmeridian]

Hello good folks,

Have a 61c with CallPilot. Anything special I need to do to make sure the time transition goes smoothly..thanks

 

[Johnthephoneguy]

For 2007 you will need to change your start and end dates as follows:

To move the clock forward on the 2nd Sunday of March at 2 am
FWTM 3 2 1 2

To move the clock backward on the 1st Sunday of November at 2 am or change the last digit to 3 to change it at 3am
BWTM 11 1 1 2

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[jrmeridian]

John,

Thank you very much my friend. I really appreciate your prompt response. Does the CallPilot pull the clock from the 61C?

 

[jrmeridian]

That would be in Ld 2, correct?

 

[jrmeridian]

Ok folks...pulled out the good Ole NTP's and if you want to check if your are set for DST.

LD 2

.TDST

The above command will display what the system settings are for DST. Also, (I will answer my own question from above), my voicemail system which happens to be CallPilot pulls the time from my PBX (61C)..I am sure many of you knew that (I was not sure).

Thanks,
JR

 

[PERRYPJ]

THIS IS FROM A ETAS TECH FROM NORTEL

A DST Extension PEP will be available for application to CallPilot 3.0 SU02 and CallPilot 4.0 SU03 servers in February 2007. This PEP will not be available for CallPilot 2.5 and earlier systems. In conjunction with the server PEP, an updated CallPilot Manager will be introduced. CallPilot 2.5 and earlier systems should upgrade to 4.0 and apply the DST extension PEP and the CallPilot Manager update.

In addition, to the CallPilot PEP, a Microsoft Windows 2003 hot fix will be required for the CallPilot PEP to function. The hot fix and instructions for its use are available at:

http://support.microsoft.com/kb/928388

HOPE IT HELPS


OLD ROLMEN WORKING ON NORTELS