loopretnav
Technical User
Hi All
How is a DSS-9000 BLF connected to a M2250 console on an
option11.
Kevin
How is a DSS-9000 BLF connected to a M2250 console on an
option11.
Kevin
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DSS-9000
- Thread starter loopretnav
- Start date
- Status
It has been a while, but I believe you connect the cable from the DSS9000 to the console via a RS232 connector under a breakaway tab on the back of the console. You need a -24v transformer and the manual on how to connect and program. If the -24v is connected wrong you will fry the console.
- Thread starter
- #3
loopretnav
Technical User
Customer bought the BLF but did not get a manual with it.
I found this post from JUNE 2004 (Yes, 2004!) You might want to replace the 2250 with a 2616 and 4 add-on modules. Works great with a headset.
(I'll bet that John has forgotten about that post! I'm starting to forget what I did 10 minutes ago...)
DocVic
Dedicated to Nortel Products till the end.
Need help?
(I'll bet that John has forgotten about that post! I'm starting to forget what I did 10 minutes ago...)
DocVic
Dedicated to Nortel Products till the end.
Need help?
The manual is in this package I *think* - not sure they are the same:
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--
It would help if I post the post, huh!?
DocVic
Dedicated to Nortel Products till the end.
Need help?
DocVic
Dedicated to Nortel Products till the end.
Need help?
- Status
Similar threads
- Locked
- Question