Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DSP Resource usage

Status
Not open for further replies.

callum181

Technical User
Mar 17, 2017
9
GB
Hey All,

We are looking to move our current Avaya CM system from one virtual media server and 11 media gateways 8 being g450 1 g350 and 2 g430 to SIP that we already have up and running for our main head offices. So current dsp resource provided from these gateways is 729.

I actually think this is total over kill we are looking to move all our site's about 14 that have gateway's to go via our main SIP lines in our data centres via there MPLS links thus removing the need for sites to have ISDN. And removing the media gateways from sites providing a large saving in hardware support cost's

My real question here is. Is there an easy way to view DSP resource usage say over the last week and or month. This is so we can lower the licensing cost needed to move all these dsp resources to the media server.

I have used the command list measurment ip DSP-resource summary yesterday peak assuming this gives me accurate usage for one day worth of dsp usage? Am i then looking at the equivalent rsrc peak line for dsp resource used?

I have included a snip of this command ran on a normal day for use maybe someone can advice on that one day also.

Capture_ltiiet.png


Thanks Callum
 
I use some scripts to export that data daily, then you can look for peeks over a week, month, year. A simple solution is to use ASA to run a report daily.
 
Thanks phoneguy55,

So what i'm looking at with the equivalent rsrc peak column is basicly what g711 estimated capacity (DSP) resource I am using per trunk correct?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top